Riggler's and Tskguy's M49 / M50 bodies

[rainton]

Wow - looks great!!
I wait for the pics of the internals - but if it looks that good from the inside to
I will go for it...

 

[tskguy]

Did you see my last post with pictures of the inside???? That's really it, there are no rails for mounting PCB's like a traditional body. It all attaches to base with standoffs.

Here is another pic of the inside...

 

[strangeandbouncy]

Guys,


  I wish I could, but I can't!   



      . . . yet . . . .


      Wonderful stuff!


      ANdyP

 

[rainton]

Did you see my last post with pictures of the inside???? That's really it, there are no rails for mounting PCB's like a traditional body. It all attaches to base with standoffs.

Here is another pic of the inside...

Ah ok - and what about the part that holds the capsule?
I saw a picture somewhere in the original thread:  http://www.groupdiy.com/index.php?topic=50657.msg667105#msg667105

 

[tskguy]

That is from Dany's thread, As you can see the PCB boards hold the capsule. I will be building the mic this week and I will take some pics along the way....

 

[riggler]

Would it work for Dany's 47 fet PCB's at all or just the M49 round PCB's.

You are in luck. It appears that Dany's 47FET boards (44mm x 48mm) will fit. And it's even a little safer than pictured because the corners on that board are rounded. Check it out:

what's the outer body diameter beneath the headbasket, again?

The main body tube outer diameter is 71mm, that "Saturn ring" diameter being 79mm.

 

[tskguy]

C'mon guys only five more needed!!!!

 

[tonycamp]

Eric, are you fellas closing the door at 20? or how long will you leave ordering open?, i will have $ in a few weeks, i'd love one of these.

also, 67 capsule?

cheers
T

 

[chunger]

Well,  I did my part for the effort!  hoping you guys are able to pull together a US production run of these little gems.  Oh, quick question.  If the headbasket mesh is stainless steel.  I suppose it is glued in. . . how is the mesh grounded?

 

[JazzTheKingOfHearts]

I want one of these

 

[Steph.B]

2 for me please !  8) (payment sent)

Only 3 left !  ;D

 

[tskguy]

Sweet! Thanks Steph!

Glad we are close!!! So Tony, yes I am actually going to have many more available moving forward. So no worries. 

Chunger, yes you are correct the stainless is glued in. That being said the mesh is pressed in while gluing and makes the connection for shielding with no issue. I will also be verifying before shipping.

Eric

 

[Marc Duchesne]

I'll take 1...

 

[Marc Duchesne]

Money sent... Thanks a lot !!!

 

[riggler]

That means one more and we're a go!

 

[dandeurloo]

I'm in.  I sent paypal for one now.

 

[riggler]

Well I am getting a case of beer tonight, we have 20! Thanks guys!!

 

[dmp]

Paid for 1. Looks great!

 

[ddageek]

Well I am getting a case of beer tonight, we have 20! Thanks guys!!

If these are as good as they look Ill send you a case of Bulavard when I get my M49 body !

 

[bkbirge]

Blood squeezed from a stone sent for 2 brass murder weapons.