You've thought you might have seen the most ghetto pieces in prodigy pro history, but you were wrong. I've constructed an EQP-1 style passive filter section and another box with the MEQ mid cut section. The EQP-1 uses the Cinemag Pultec inductor. The MEQ uses the Sowter MEQ inductor. Both units use Edcor input and output transformers. The output is 150 ohms so that I can use different mic pres for make up gain. I'll apologize up front for the pic quality, sloppy wiring, crap second hand cases, and sorry metal work (notice the attention to detail on the pot shafts, and if you could only see the top of the EQP-1, I had to cut ugly holes in the top so the Edcors could fit.
front and inside of PEQ1:
front and iside of mid cut:
Thanks to assistance from NYDave, PRR, and everyone here who've answered my questions regarding these things.
Craig
front and inside of PEQ1:
front and iside of mid cut:
Thanks to assistance from NYDave, PRR, and everyone here who've answered my questions regarding these things.
Craig