The microphone capsule photo and information thread

[micolas]

Might do voice test later, have flu and sound like a malfunctioning robot right now.

Used the white "RK-87" capsule to replace the one in my slightly modded T.Bone SC-400 and to my ears there was great improvement, haven't yet to test the green one but i have something planned for it too.

Get healthy as soon as possible!
The sc400 capsule isn't bad, if the Ali RK87 sounds better then it can definitely be of interest. Put a link to the seller.
Thank you!

 

[nyystero]

Both of these models should come from Takstar, an experienced "replicator" who processes metal plates in Ningbo. Their K67 series is still good, and Kingkorg has tested their CTS-2. In China, they process tens of thousands of plates at once, with colored plastic rings used to identify customersView attachment 145792

Good to know, interesting!
Great value in that case, 797 capsule(double sided) for me was triple the cost off Alibaba

 

[micolas]

Both of these models should come from Takstar, an experienced "replicator" who processes metal plates in Ningbo. Their K67 series is still good, and Kingkorg has tested their CTS-2. In China, they process tens of thousands of plates at once, with colored plastic rings used to identify customersView attachment 145792

The chart with FR belongs to @kingkorg , and I allowed myself to write on it which are the compared capsules.
Are you sure the capsules presented by @nyystero are produced by Takstar? I have doubts about this.

 

[Екатерина]

The chart with FR belongs to @kingkorg , and I allowed myself to write on it which are the compared capsules.
Are you sure the capsules presented by @nyystero are produced by Takstar? I have doubts about this.

Of course, I was also deeply skeptical about this until they showed these pictures. In fact, there are far more styles than that. Almost all of the electrodes for Chinese capsules are made by Ningbo OEM, with the difference being whether they have undergone secondary polishing

 

[Екатерина]

Of course, most of the K67 type capsules produced in China are usable because their production is very industrialized, but K47 M7 CT12 is very ordinary

 

[micolas]

Of course, I was also deeply skeptical about this until they showed these pictures. In fact, there are far more styles than that. Almost all of the electrodes for Chinese capsules are made by Ningbo OEM, with the difference being whether they have undergone secondary polishingView attachment 145795View attachment 145796View attachment 145797View attachment 145798View attachment 145799

CTS-2-R-01 are only available on Taobao?
Have you tested it how does it sound?

 

[Екатерина]

CTS-2-R-01 are only available on Taobao?
Have you tested it how does it sound?

I didn't test it, but I asked their customer service and they said it's the same as CTS-2, only the brand supplied is different

 

[Tim Campbell]

CT12 is very ordinary

CT12? Ordinary? Never! hahahaha

 

[Екатерина]

CT12? Ordinary? Never! hahahaha

Your CT12 is great, but it's basically unusable when made in China. Xingde hasn't been debugged yet