Interesting question. This logo is not from Siemens, AEG or Beyschlag, they all look different. It would be interesting to know who produced them.It is very common in vintage Neumann U47, U48, M49, and U67. What company makes them and what is their origin? Made by Siemens? Or AEG? I tested a few and noticed some differences with modern resistors.
The logo looks pretty similar, a flash and a sine wave in a circle. I think you are right! How did you find them? Lets send them a TelexIt seems the company was called „Gesellschaft für Hochfrequenz und Elektromechanik mbH“ which means something like company for high frequency and electro mechanic...
https://www.ebay.de/itm/122784237069
I don't want to be harsh or overly critical, but I would like to say, if I may, that these impressions of differences in sound according to this, or that component, seem to me quite exaggerated.It is very common in vintage Neumann U47, U48, M49, and U67. What company makes them and what is their origin? Made by Siemens? Or AEG? I tested a few and noticed some differences with modern resistors.
I tested a few and noticed some differences with modern resistors.
Thank you very much for your knowledge. It has solved some doubts. I think that in circuits with relatively strong signals, various resistors of the same type will not have a great impact. However, if it is a weak signal in a closed environment with relatively large interference, the weak signal will Transmission is more susceptible to interference, and non-inductive resistors should have more advantages. In theory, in such a circuit, different resistors still have some influence. The noise and temperature drift of metal resistors are smaller than those of carbon film or carbon core resistors, but human It is not certain whether the ears can feel the difference.I don't want to be harsh or overly critical, but I would like to say, if I may, that these impressions of differences in sound according to this, or that component, seem to me quite exaggerated.
Apart from for aesthetic reasons, I would advise against the use of very old components, sometimes poorly stored.
Technicians with measuring equipments, and ears, are trying to dispel these persistent myths.
Feel free to read : Replace resistor by low-inductance resistor - Is it audible?
Some links are included , on this web page, for capacitors ...
Also : Audible difference in high-end capacitors? - ABX samples
Cheers
Fred
What sort of differences?
In the audio range, the differences are non audible in ABX tests, and the measures tell us the same.Thank you very much for your knowledge. It has solved some doubts. I think that in circuits with relatively strong signals, various resistors of the same type will not have a great impact. However, if it is a weak signal in a closed environment with relatively large interference, the weak signal will Transmission is more susceptible to interference, and non-inductive resistors should have more advantages. In theory, in such a circuit, different resistors still have some influence. The noise and temperature drift of metal resistors are smaller than those of carbon film or carbon core resistors, but human It is not certain whether the ears can feel the difference.
Great, very similar, thank you! I think the resistance of these resistors is custom made by Neumann from these companies.It seems the company was called „Gesellschaft für Hochfrequenz und Elektromechanik mbH“ which means something like company for high frequency and electro mechanic...
https://www.ebay.de/itm/122784237069
What I refer to here is the difference in different raw materials. For example, in the early days, it was carbon film, but in modern times, it is almost all metal film. As for the difference in sound, I have not tested it yet because I don’t have two identical Vintage Neumann microphones. If the non-AB simultaneous recording is compared, I feel there is no point.
Bummer, it would be nice if they were still in business. They had really nice things on offer! High precision resistors, up to 10G ohms and low inductance types, really nice stuff....
I absolutely endorse trying both and seeing which you prefer, if any, I learn a lot better that way and feel more certain than reading others experiences (with non-identical tests, and even then opinions fall into account, which can differ person to person)I’ve heard mics with vintage resistors that sound incredible, I’ve heard mics with vintage resistors that sound less than incredible, exactly the same for modern metal resistors too, there is no blanket answer, I like originality, but when chasing magic you get there however you can
Apart from for aesthetic reasons, I would advise against the use of very old components,
Enter your email address to join: