1wildthing
Well-known member
- Joined
- Jan 27, 2021
- Messages
- 64
Hi guys, I've had my first attemp in designing a pcb starting from schematic and I succeed.
I realized my version of the zadvitsky's Tape saturator that you can find at Tape saturation compressor/limiter in a wooden box
This is the original schematic:
Now what I would like to do is to make the High freq boost/cut stages bypassable using a dpdt switch. This is my modified schematic:
My idea is to get something like the Looptrotter Sat2rate 2 adding even a lo freq Cut/Boost switchable stage, but before moving on new mods I need to solve this problem.
When I use the bypass switch the input/drive pot is passing the sound only when in full CW position. Moreover the resulting sound is distorted and the saturation intensity switch donesn't work at all.
Do you have any suggestion?
I realized my version of the zadvitsky's Tape saturator that you can find at Tape saturation compressor/limiter in a wooden box
This is the original schematic:
Now what I would like to do is to make the High freq boost/cut stages bypassable using a dpdt switch. This is my modified schematic:
My idea is to get something like the Looptrotter Sat2rate 2 adding even a lo freq Cut/Boost switchable stage, but before moving on new mods I need to solve this problem.
When I use the bypass switch the input/drive pot is passing the sound only when in full CW position. Moreover the resulting sound is distorted and the saturation intensity switch donesn't work at all.
Do you have any suggestion?
Last edited: