1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
zayance said:
edanderson said:
a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed
8) 8) what else?  ;D ;D ;D

a nice expresso ??
 
RedNoise said:
zayance said:
edanderson said:
a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed
8) 8) what else?  ;D ;D ;D


a nice expresso ??

Of course
 
I updated page 5, please check if everything is correct.
Thanx to Ed Anderson for output transformers options.
I will be happy to try here b11148 from Hairball Audio as well.

Regarding the T-pads, input and output transformer options.
Hairball Audio has an excellent service, I recommend them for input transformers and T-pads.
My personal choice was LL1524, I liked the sound.
However, API output clones can sound great with API-kinda DOA here.
It is all up to your taste.

I will post very soon the front panel design for 1RU stereo unit.
IMHO, for people who need great sounding stereo FET compressor in 1RU...
this is really cool option.
 
I think F76 PCB's will be available, like CRM or 2254C, at my ordering thread;
by the reason we make some units and want to keep part's cost low,
we will offer the full parts kits at this time, later-really, dunno.
20th Nov is a break for kits orders.
 
Igor is that panel made out of pcbs??
I used to work at a pcb manufacturer we use to do panels like that for instrumentation panels.
Nice idea?
 
Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer
 
AudioGimmer said:
Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer


sure how many kilograms do you need ?  ;D

email me for ordering, thanks
 
Still OK. We busy with work, btw, come make music here:
http://www.facebook.com/pages/Tel-Aviv/DB-Music-Studios/157025280987856

If you don't have a phazebuk, don't create an account, it is f@@ng time consumer;
re-newed DB official website will be available soon.

Back to F76...

I ordered 50 nice PCB sets. They will be ready next week.

It is OK to make pre-orders till 1st December, the date we will oder the parts for kits and
PCB's will be ready to ship.

It is OK to pay for kits/PCB's.

 
PCB's arrived, stuffed, checking now!
PCB orders will be shipped very soon, regarding the kit,
there may be delay due to Grayhill switches and metal brackets,
I will do my best to ship them before Jan 15th.
 
Since there is no support thread yet, I will post my question here:

Anyone sourcing parts yet? I am not quite sure which T-Pad is the right one  :-\.

Thanks for your advice!
 
Back
Top