chilidawg
Well-known member
- Joined
- Nov 27, 2013
- Messages
- 177
So, I've got a very noob question. Working on my friend's PRS SE that has a very noisy guitar signal.
Buzzer in continuity mode didn't beep, so I switched to resistance mode.
I do think this is really bad, because the conductive paint is connected to ground, but I could be wrong.
What do you think guys?
How can I remove the shielding?
At least not with some sort of a destructive method to remove it, and I don't want to do this.
Different story if the guitar is mine. I wouldn't put shielding at all in the first place, because none of my guitars have shielding, I just wired them properly, and they're super quiet.
Buzzer in continuity mode didn't beep, so I switched to resistance mode.
I do think this is really bad, because the conductive paint is connected to ground, but I could be wrong.
What do you think guys?
How can I remove the shielding?
At least not with some sort of a destructive method to remove it, and I don't want to do this.
Different story if the guitar is mine. I wouldn't put shielding at all in the first place, because none of my guitars have shielding, I just wired them properly, and they're super quiet.