Hey,
I am planning on building my own NS10 monitors. The woofers and tweeters are easy to find. But, since I don't know a lot about electronics, I'd love to get some help with building the crossovers. The building seems easy, but it's researching the components that I'm not too sure about.
You can see the schematic and a picture of the original (?) crossover in the links below :
http://forum.analogconsole.com/images/ns10_schematic.jpg
http://forum.analogconsole.com/images/ns10_crossover.jpg
Now, for capacitors i was thinking about these :
http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=027-918&scqty=6
http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=027-932&scqty=4
Now the hardest part for me is to find the correct crossover inductors..
Could anybody suggest me the correct inductors ? The schematics doesn't give much information. The only extra information I found about the inductors was this :
L1 40mm dia 25mm high core 1.715mH 0.6R DCR
L2 28mm dia 20mm high core 591.4uH 0.6R DCR
If there is any other advice, please feel free to reply !
Regards,
Mr.Franky
I am planning on building my own NS10 monitors. The woofers and tweeters are easy to find. But, since I don't know a lot about electronics, I'd love to get some help with building the crossovers. The building seems easy, but it's researching the components that I'm not too sure about.
You can see the schematic and a picture of the original (?) crossover in the links below :
http://forum.analogconsole.com/images/ns10_schematic.jpg
http://forum.analogconsole.com/images/ns10_crossover.jpg
Now, for capacitors i was thinking about these :
http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=027-918&scqty=6
http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=027-932&scqty=4
Now the hardest part for me is to find the correct crossover inductors..
Could anybody suggest me the correct inductors ? The schematics doesn't give much information. The only extra information I found about the inductors was this :
L1 40mm dia 25mm high core 1.715mH 0.6R DCR
L2 28mm dia 20mm high core 591.4uH 0.6R DCR
If there is any other advice, please feel free to reply !
Regards,
Mr.Franky