Landins
Well-known member
Time to sum up after putting the lid on version 2 yesterday. First of all it was a stupid and ambitious project that I was not prepared for/had the knowledge about. But the more you invest the harder it is to put aside. Biggest issues has been part sourcing. For transformers I ended up winding my own on as i got hold of a good winding machine. I wound according to v72 schematics. Hum sourcing has been hell and Ive gain a lot of insight on working with high impedence. Its been a perilous learning experience.
By no means it sounds as the original. But as some artist cover songs better or worse I see this as a good cover.
In pic is version 2 with phantompower, high z, fine control for gain, 9 step gain, 20db pad and lo cut filter. Built for a friend.
Ps. Do not read posts above.
By no means it sounds as the original. But as some artist cover songs better or worse I see this as a good cover.
In pic is version 2 with phantompower, high z, fine control for gain, 9 step gain, 20db pad and lo cut filter. Built for a friend.
Ps. Do not read posts above.