Does anyone sell an INA217/1510/1512 PCB or have one I could etch?

[resilient]

Hi all,

I am working on some basic preamps for my setup and I'd like to build 8 channels of an INA217 pre to use as my primary preamps.  I'll be adding a Seventh Circle for color a little later.

Does anyone know of anyone who sells PCBs for any of these chips?  Or does anyone have a PCB design they wouldn't mind sharing with me that I could etch?

Thanks!

Brandon

 

[Rochey]

Expat Audio Edens are all ready to go, and tested

 

[resilient]

I am looking for a cheap solution.    I've already got everything I need except a few caps and resistors, so I'm trying to find a PCB to either buy or etch. 

Thanks for posting, though!  Looks like great stuff.

Brandon

 

[3nity]

pcbgrinder.com

 

[hazel]

http://electronics.dantimax.dk/Kits/Preamps_-_poweramps/index.html

i built my 1RU 8 channel preamp from dantimax

 

[Gustav]

I am looking for a cheap solution.    I've already got everything I need except a few caps and resistors, so I'm trying to find a PCB to either buy or etch. 

Thanks for posting, though!  Looks like great stuff.

Brandon

https://pcbgrinder.com/index.php?route=product/product&path=59_71&product_id=100

Theres a self etch file in the documents for this - just check the scale of the PDF. Its off, and I haven't gotten around to fixing it.

Gustav

 

[resilient]

Thank you for sharing this.  I had not realized the PCB was in the PDF.  You are awesome, sir.    I'll do some print outs tonight and see if I can get the scale right.

Brandon

 

[Gustav]

I'll do some print outs tonight and see if I can get the scale right.

Brandon

See if the scale is right on this one and report back.

Its 100% correct when I print this PDF on my own printer.

https://pcbgrinder.com/download/Check.pdf

Gustav

 

[resilient]

Sorry it took me so long, but I finally have an answer for you.  It did not print out to the correct scale.  A bit small.

Here's a pic:

Brandon

 

[Gustav]

70 x 145, give or take...


Gustav

 

[seymourgler]

Reviving this very old thread, I know, I know. @Gustav thank you for sharing this self-etchable preamp PCB. I'm intrigued. Do you still have a parts list and/or layout notes for this project? Thanks and cheers!

 

[soulsonic]

Looks like all the details are lost to the ether, but if you're looking for a PCB design for a stock THAT preamp circuit, I could draw it easily.

 

[seymourgler]

Looks like all the details are lost to the ether, but if you're looking for a PCB design for a stock THAT preamp circuit, I could draw it easily.

Seriously?! That would be awesome! I think @Gustav 's had switchable phantom power too.