darnell
Well-known member
Hey all,
I am looking to try out some Crimson CT-2385's I just got in one of my Neveish pres (JLM 1:4 Input/Purple DOA/Cinemag CMOQ2S) I have 2 like this and have 2 Crimsons. Want to swap out the OT on one and compare. I already sent an email over to Jens at Eisen (who is one of the best, most helpful people ever!!!!) But it's prob past his work hours, And I have some time this eve to geek out. So I figured I would poll the masses to see if anyone could help me out.
Here's the email I sent....
Any knowledge would be much appreciated!!
Thanks.
Daryl
I am looking to try out some Crimson CT-2385's I just got in one of my Neveish pres (JLM 1:4 Input/Purple DOA/Cinemag CMOQ2S) I have 2 like this and have 2 Crimsons. Want to swap out the OT on one and compare. I already sent an email over to Jens at Eisen (who is one of the best, most helpful people ever!!!!) But it's prob past his work hours, And I have some time this eve to geek out. So I figured I would poll the masses to see if anyone could help me out.
Here's the email I sent....
So I am about to drop a Crimson CT-2385 into one of my Neveish clones and compare on a few sources with the other stock neveish. I want to see which one I like better before I get any Carnhill inputs. Just wondering if the Crimson is a drop in replacement, or if I need to change wire routing/add or remove any caps or resistors on my DIY500v4 2007?
The Cinemag cmoq2s (nothing on R16/R17/C10) that is in there is wired as indicated on the pcb as.....
Yel-Org-Gry-Vio-Blu(*)-Grn-Red(**)-Brn
Crimson CT-2385 is from left to right.....
Gry-Vio-Blu-Grn-Yel-Org-Red-Brn
Just a little confused if Crimson used different colors and same wiring as the Cinemag?
Thanks for the help.
Daryl
Any knowledge would be much appreciated!!
Thanks.
Daryl