Doesn't adding EQ change the phase response though?
Rochey said:Doesn't adding EQ change the phase response though?
pucho812 said:may not be the best option but having parallel walls causes all kind of problems, This I am sure you know. but contractors and the rest of the world loves to look at parallel walls. Any chance you can angle a wall so it is parallel might have to build frame and dry wall it to an existing wall.
martthie_08 said:Jens, you are right of course, but because the studio walls were already plastered with "Plattenabsorber" we tried putting two of the VPR up against the ceiling on one end of the control room. As the 1mm metal does tend to bend, there are spots where the Basotect does not have good contact to the ceiling. Either we will try adding more fixing points which is kind of against the concept of the inventors, or we will make space on the walls by removing two "Plattenabsorber" and put the VPR's there instead.
cheers from Stuttgart, Marten
radiance said:Behringer DEQ2496 is by far THE cheapest option and is supposed to have a rather good digital section inside. Analog in/out section (opamps, caps) and PSU can be upgraded if you're not afraid of some SMD...
here more info...> http://www.awdiy.com/
And yes...room treatment first although there will always be some troublesome standing waves left if your room is not specially designed.
andre tchmil said:radiance said:Behringer DEQ2496 is by far THE cheapest option and is supposed to have a rather good digital section inside. Analog in/out section (opamps, caps) and PSU can be upgraded if you're not afraid of some SMD...
here more info...> http://www.awdiy.com/
And yes...room treatment first although there will always be some troublesome standing waves left if your room is not specially designed.
Any idea if the clock is any good, or if it can be fed with an external clock signal ?
Enter your email address to join: