GssL 20th Anniversary edition

[Andado]

All that doesnt matter - you have a lot of problems, well cover the basic trouble shooting first - posting stacked "Now I found this, now this", is also generally confusing when we try to trouble shoot, but dont worry, well get there.

I marked the voltage points we need to measure, as well as the refernece to measure them to.

Start by verifying those.

Gustav

Here is the measurement

 

[Andado]

@Andado It's gonna be way easier for Gustav to troubleshoot when he has a list of all the voltages written down instead of video!

Sick idea with the 3d panel btw ! Good job

Thanks man. Yes 3d printers is a must have

 

[Gustav]

The neg 12 part I guess I’m wrong can’t measure from ground to that right?

You can measure all the points to the reference point I marked.

Here is the measurement

And you posted it here, unless you measured it some other way?

If you did get -12V relative to ref, its all fine.

Post a picture of the whole board, pls.

Gustav

 

[Andado]

You can measure all the points to the reference point I marked.



And you posted it here, unless you measured it some other way?

If you did get -12V relative to ref, its all fine.

Post a picture of the whole board, pls.

Gustav

Yes I did get -12 and yes from the reff point.
Here’s the board.
Really appreciate all the help Gustav