sonolink
Well-known member
I'm trying to mod a pedal with some switching options. It's 2 circuits in one box, a clone of the popular King Of Tone.
As it is conceived now, 2 switches allow to use Fx1, Fx2 or both in series. What I would like to be able to do, is to route other Fx in between. Using a switched jack connector at Fx1's out and another switched jack at Fx2's input should do the trick.
This is the outboard wiring used:
https://ibb.co/68jLkNp
My question is: is the grey wire that connects both 3PDTs the right place for both switched jacks?
Thanks in advance!!
Cheers
Sono
As it is conceived now, 2 switches allow to use Fx1, Fx2 or both in series. What I would like to be able to do, is to route other Fx in between. Using a switched jack connector at Fx1's out and another switched jack at Fx2's input should do the trick.
This is the outboard wiring used:
https://ibb.co/68jLkNp
My question is: is the grey wire that connects both 3PDTs the right place for both switched jacks?
Thanks in advance!!
Cheers
Sono