MK-U47 - build thread

[Forcemusicgroup]

Would any one happen to have the BOM to this mic. I I ownits years ago. I reached out to @ioaudio his hard drive crashed and doesn't have the info anymore. HELP.

 

[chefducuisine]

I have got the infos on an old hard drive... I am abroad but will search for it as soon as I am back home. In the meantime you can check the original schematic of the U47, the MK-U47 is not that far away. He used a reed relay for pattern switching if I remember correctly.

 

[vinylwall]

Would any one happen to have the BOM to this mic. I I ownits years ago. I reached out to @ioaudio his hard drive crashed and doesn't have the info anymore. HELP.

I don't exactly have the BOM, but I do have all of the build docs for this mic (attached as a zip file).

 

[chefducuisine]

I have exactly the same - Jimi was faster.
Unbelievable - this was already 10 years ago...

 

[r2d2]

I don't exactly have the BOM, but I do have all of the build docs for this mic (attached as a zip file).

Do you also done some audio tracking test, or comparison with the original ?

 

[Forcemusicgroup]

I Apologize,

ioaudio MK47 kit is the microphone BOM I am looking for. I bought a kit off the blackmarket, didn't come with a BOM, The creator has claimed the information was lost due to a hard drive failure. Any help would be appreciated @ioaudio​

 

[chefducuisine]

This one?

 

[Forcemusicgroup]

YES!!!!!! Just need the types of resistors etc to complete this build.

 

[Forcemusicgroup]

This one?

I owe you a coffee

 

[chefducuisine]

You're welcome. That's what this forum is about
Enjoy the build process and let us know the outcome.

 

[trevhut]

Hi, I'm in a similar situation as Forcemusicgroup. Started a MK47 build a long time back and abandoned due to the usual "life getting in the way" stuff. Does anyone have a BOM for the PSU? I was considering the Zayance board if it's still available.

 

[Jim50hertz]

Hi, I'm in a similar situation as Forcemusicgroup. Started a MK47 build a long time back and abandoned due to the usual "life getting in the way" stuff. Does anyone have a BOM for the PSU? I was considering the Zayance board if it's still available.

See reply #763 above for the build docs if you don't have them. I built my PSU directly from the original schematic as I recall, but the Zayance PCB will work too, as will Dany's PCB for the 408a build here.

 

[Forcemusicgroup]

Jim50hertz. Lets build together