MK-U47

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Good morning Max,
my kit arrived, thank you very much.  ;D
I'm starting working on it very soon, if I can even today.
Your assembling guide is really well done.
Have a nice day.
Max
 
Hi Max

I emailed you the day you announced you started taking pre orders for the second batch, haven't heard from you since.

I'm still up for one set :D

Best Regards

Frederik
 
Got Mine  ;D
these are great .........
many thanks Max

just a question ! did you have the oportunity to compare your tranny to the  CineMag CM-2461NiCo  ?
 
thanks for your feedback, glad all the kits arrived with no troubles.

madreza - i have all my "competitors" bv8 transformers here and did testings and dissections to see what they are doing - for internal matters.
I leave comparisons to costumers.

to all: the backordered parts where postboned again - and should arrive around christmas. so realistically i will have new kits not before January.
If you send me an email i received it - i check my spam folder regularly for this reason. I will answer when your order is ready to go.

-max
 
Hi all !

sorry for this question but where i can find a M7 capsule (or good equivalent) for sell ?


cordially

 
neodyms said:
Hi all !

sorry for this question but where i can find a M7 capsule (or good equivalent) for sell ?


cordially

Thiersch is good.
 
Does any one finished the PSU and have some photos ?

is it possible to make a special thread for the psu or get the complete part list?

why the 680 and 330 ohms resistance are in parallel in place of a 200 ohms resitance ?
ares they in parallel and Why ?

and a least why a test switch ?

ps: i read the 3 threads about MK47 project but i don't undertand 
 
this was answered before , don't remember where now.
also this would best be asked in the lab thread.
the 680/330R are either - or . not both in parallel .
the 2K3 (test switch) resistor is to give a ballpark figure of the voltages , before connecting the mic.

 
Hi all !

i just ask some Thiersch capsule prices for this project this the reply

One sound transducer STW7 is about 265 EUR.
At the moment we grant a discount of 15% on red line STW7
and a discount of 5% on STW7 blue line.
That means one STW7 blue line is about 251,75 EUR,
STW7 red line about 225,80 EUR.
We accept paying by PayPal (+4%) and international bank transfer.

Delivery time:
STW7 blue line: 5-6 weeks
STW7 red line: 2-3 weeks

One holder STS7 is abut 45 EUR.
They will be available agian at least at the beginning of 2011.
We don't have them on stock at the moment, the demand was higher than expected.

Do you have a VAT id? If not there will be 19% VAT on all prices + postage. To order any item please send your address(es) for invoicing/shipping. Shppment to France should be about ca 8 EUR (without insurance, registered letter).


That's cheaper than Beezbeez ...

i  asked is they could make a discount for us
 
Hi everybody,

shipping of parts was confirmed for end of december.
Until then i will prepare the rest of the kits so shipping will start early in jan/11.
I will than contact everybody who send me a mail.

-max
 
Hi Max,

I Would still like if you would confirm that you have received my email which i send to you on the 31th of October.

I definetly still want the MK47 kit, and would like to hear how things are working out!

- Frederik
 
Thanks for the patience everybody.
I am currently winding the coils/transformers for the new batch.
Kits will be available soon, first or second week of the new year.
I will send out invoices via mail when your order is ready to go.

-max
 
Back
Top