hiegdk
Member
- Joined
- Jul 3, 2017
- Messages
- 24
Last year I designed and assembled a desk/workstation using 80/20. I designed in in Fusion 360 and had a local 80/20 supplier do all the cutting (they also supplied all the parts).
I've never done anything like this before but I'm quite happy with the results. Figured I'd share in case anyone is thinking about doing something similar.
Pros: fun, solid, useful, customizable, expandable.
Cons: stupidly expensive - like the only reason to do it is if, like me, you get obsessed with the idea and can't be stopped.
Here's a link to some quick documentation of the project I threw together: Desk Project
I've never done anything like this before but I'm quite happy with the results. Figured I'd share in case anyone is thinking about doing something similar.
Pros: fun, solid, useful, customizable, expandable.
Cons: stupidly expensive - like the only reason to do it is if, like me, you get obsessed with the idea and can't be stopped.
Here's a link to some quick documentation of the project I threw together: Desk Project
Last edited: