relay based stepped attenuator (kit)

[dagoose]

My DIY monitorcontroller with 4 deck elma switch is getting a bit crancky after about 8 years of intense use, so i'm looking at building a new one. I also checked of the shelves controllers, but still none on the market that suits my needs.
This time I want it to work with an encoder and relay based, preferably with a display and of course balanced  8)

I found some kits that might be interesting, but not sure if there are more options.
This one (http://www.vaneijndhoven.net/jos/relaixed2/index.html) looks really interesting, but not sure if he still sells them, the site is pretty outdated, but I dropped him an email since he's also dutch.
This one is also interesting, but no display: http://electronics.dantimax.dk/Kits/Selectors_-_attenuators/index.html

Any more options?

 

[kante1603]

My DIY monitorcontroller with 4 deck elma switch is getting a bit crancky after about 8 years of intense use, so i'm looking at building a new one. I also checked of the shelves controllers, but still none on the market that suits my needs.
This time I want it to work with an encoder and relay based, preferably with a display and of course balanced  8)

I found some kits that might be interesting, but not sure if there are more options.
This one (http://www.vaneijndhoven.net/jos/relaixed2/index.html) looks really interesting, but not sure if he still sells them, the site is pretty outdated, but I dropped him an email since he's also dutch.
This one is also interesting, but no display: http://electronics.dantimax.dk/Kits/Selectors_-_attenuators/index.html

Any more options?

Hello,


I use the Soundskulptor Controller and I'm very happy with it.Seems to have all the features you want.


http://www.soundskulptor.com/uk/mc624.html


Best regards,


Udo.

 

[dagoose]

I went for this controller from tentlabs http://www.tentlabs.com/Components/page31/page31.html
It's also a dutch company which is a big plus for me as well.
Got it in already and it looks and works great!

 

[dagoose]

Like I already mentioned, I went for the tentlab approach and this is the final result.  8)