dario84
Active member
Hello there!
just a heads up... Im new to this forum and I know this might not be the right place for my issue but mybe some of you might have experience with this and put me on right track before I do some stupid stuff to the board I love as is (stock version 24ch 8gr - 1984)
as well I would like to know how to add photos to the forum so I can show my module...
I am experiencing problems with my soundcraft 600 master module. It has been damaged I guess and someone has done some work on it as the wiring is custom moded and I can not understand what was done. I have problems with the Control Room outputs. Right channel is 1-3db lower than the Left. Mix out, studio speakers outputs are ok - 0.1db of difference in peaks but I belive this is ok.
The module has been factory checked on 20.12.1984 but no information about the servicing later on.. the chips that were supposed to be NE3552 are nowehere to be found on the module and all of them are tl072cp - most the same company and make and some different like malasya and portugal... bla bla.. anyway
I would like to completly change all the components but I only have an Issue 5 redrawn schematics and it seams not to be the same with the naming of the components as they are on my circuit board.
I've been loosing my mind and I dont want to damage it even more before I have some serious information on what and where I should check first to find the problem.
If aynone knows where i could get a new or used working module here in europe I would love to know...
I will appriciate your help very much!!
Thank you!
Dario
just a heads up... Im new to this forum and I know this might not be the right place for my issue but mybe some of you might have experience with this and put me on right track before I do some stupid stuff to the board I love as is (stock version 24ch 8gr - 1984)
as well I would like to know how to add photos to the forum so I can show my module...
I am experiencing problems with my soundcraft 600 master module. It has been damaged I guess and someone has done some work on it as the wiring is custom moded and I can not understand what was done. I have problems with the Control Room outputs. Right channel is 1-3db lower than the Left. Mix out, studio speakers outputs are ok - 0.1db of difference in peaks but I belive this is ok.
The module has been factory checked on 20.12.1984 but no information about the servicing later on.. the chips that were supposed to be NE3552 are nowehere to be found on the module and all of them are tl072cp - most the same company and make and some different like malasya and portugal... bla bla.. anyway
I would like to completly change all the components but I only have an Issue 5 redrawn schematics and it seams not to be the same with the naming of the components as they are on my circuit board.
I've been loosing my mind and I dont want to damage it even more before I have some serious information on what and where I should check first to find the problem.
If aynone knows where i could get a new or used working module here in europe I would love to know...
I will appriciate your help very much!!
Thank you!
Dario