Chrisfromthepast
Well-known member
- Joined
- Mar 5, 2018
- Messages
- 269
Sorry, I meant the drain resistor, as Abbey pointed out earlier, this arrangement is puzzling.
Superscope EC3 mod to line level
- Thread starter Chrisfromthepast
- Start date
Help Support GroupDIY Audio Forum:
Chrisfromthepast
Well-known member
- Joined
- Mar 5, 2018
- Messages
- 269
Ok, here is another attempt to add the gain I think I would need to match the current setup.
As this is fixed gain, where is the best place to put a trimpot? I could give a little more gain to the first stage and put a pot in between the two stages, or, since the trimpot will be hidden, should I put it in the feedback loop of the second stage?
As this is fixed gain, where is the best place to put a trimpot? I could give a little more gain to the first stage and put a pot in between the two stages, or, since the trimpot will be hidden, should I put it in the feedback loop of the second stage?
Last edited:
