The Mic

[micolas]

Yes, you need to remove the mesh to access a few screws to get the microphone body in 2 parts. More info in this thread: Almost perfect body

Thanks for the link.
If you experiment with multiple capsules, circuits, it's annoying.
Meshes must be soldered firmly to GND/body.

 

[analag]

Out for delivery today!

*Edit*

Delivered.
Now let's see how or if I can disassemble this thing.

 

[analag]

Done. Even though the grille is glued, I encountered no noise problems.
Just gently pry the grille loose with a small screw driver. Thanks for the heads up guys. Now we know.

 

[analag]

Paired the electronics with this capsule and kept it moving. No waste.