The Rude Tube

[ilfungo]

Thanks
Now everything is clearer
I do not understand one thing ...
In the video, the meter moves based on the input,
my moves imperceptibly ....
Thanks

 

[bernbrue]

overdrive switch in ? Use pentode mode and crank the drive pot full CW. Set bias to zero mA. As I said, it´s not the same thing.
regards
Bernd

 

[ilfungo]

Hi
I've changed LPF cap but the filter is still too strong...
any suggestion?
Thanks

 

[ilfungo]

???

 

[ilfungo]

My RUDE TUBE is alive!
Wonderful Sound
Beautiful project!
I only made 2 changes:
Input transformer 10k: 600
less input signal more possible shades
output 10k: 10k
I am very happy so I can have even a little saturation to use on Master.
only 2 problems:
I could not get a usable LPF (I changed several capacitors)
LM350 too hot,
after about 2 hours going into protection ...
cooled and everything in place
ideas?
Thanks

 

[bernbrue]

Hi,
mount the lm350 to chassis. Don't forget isolation!! Congratulation!
regards
Bernd

 

[ilfungo]

was already mounted on the chassis
Now try with a very large heat sink
Thanks

 

[bernbrue]

Pictures??

 

[ilfungo]

 

[bernbrue]

Hey, looks great. Some internal shots would be nice as well.
regards
Bernd

 

[bernbrue]

updated first post. New Rude Tube keys  ;D
regards
Bernd

 

[bernbrue]

It works!! 1st post updated.
regards
Bernd

 

[bernbrue]

Hi there,
updated 1st post. A bit of cosmetic work and I´m ready to rock.
regards
Bernd

 

[bernbrue]

made some Sound Demos 

 

[okgb]

where's the link ?

 

[bernbrue]

1st post updated with links

 

[dustbro]

Hey Guys!
Is there a self etch pcb file laying around? I wanna play with this over the weekend.
thanks in advance

 

[bernbrue]

Hey Guys!
Is there a self etch pcb file laying around? I wanna play with this over the weekend.
thanks in advance

Hi,
there is no self etch file for this unit. Since there are quite a lot of pcbs out there and only 3-4 units are built, people might having pcbs for sale. Try the black market.
regards
Bernd

 

[dustbro]

Thanks man!

 

[mrkrawn]

hi guys in few days i'm gonna build the rude tube and i want to know if someone have designed a stero link for this beautifull machine, and also if there are error before i start building.
thank you