thedug
Well-known member
- Joined
- Jun 13, 2004
- Messages
- 235
This might be a long shot, but does anybody have boards for adding relays to add a "true bypass" switch to a blanced device?
If not a board, what about a schematic?
Also, does the relay need to be close to the output jack or output of board to see a benefit? I.E. Would it be silly to mount the relay on the back of the switch on the front panel?
Doug
If not a board, what about a schematic?
Also, does the relay need to be close to the output jack or output of board to see a benefit? I.E. Would it be silly to mount the relay on the back of the switch on the front panel?
Doug