Analog_Fan
Well-known member
It's the first time i'm considering to use a ic from the DG series.
i got a question regarding pin 12 Logic Power Supply (5 V).
Want to power this chip from a +/-12 v power supply, what should i do with pin12?
the accepted logic is 5 volt?
further
means less than 0,8 V is considered low and more than 2.4 V is considered high?
i got a question regarding pin 12 Logic Power Supply (5 V).
Digital inputs = 0 V or 5 V
Want to power this chip from a +/-12 v power supply, what should i do with pin12?
the accepted logic is 5 volt?
further
DIGITAL INPUTS
Input High Voltage, VINH 2.4 2.4 V min
Input Low Voltage, VINL 0.8 0.8 V max
means less than 0,8 V is considered low and more than 2.4 V is considered high?