Is there anything problematic about putting two different opamps into a single processor (like compressor, EQ, or mic pre)?
I'm wondering if blending types might give interesting results, but thought I'd post the thought before trying the experiment, in case it could cause damage.
My case example would be sticking in a CAPI 0252 and a JE990 into the Hairball Lola, a 500 series mic pre.
At the moment, I put two 990s in the pre and it sounds nice and big and just has me wondering about flavour switching potential.
I realize these are meant to be swapped around, just wondered about mixing two different opamps together on the same board.
Thanks much!
I'm wondering if blending types might give interesting results, but thought I'd post the thought before trying the experiment, in case it could cause damage.
My case example would be sticking in a CAPI 0252 and a JE990 into the Hairball Lola, a 500 series mic pre.
At the moment, I put two 990s in the pre and it sounds nice and big and just has me wondering about flavour switching potential.
I realize these are meant to be swapped around, just wondered about mixing two different opamps together on the same board.
Thanks much!