Vintage Tube & Vintage FET Microphone PCB Kit For DIY & New D7 Custom Capsule

[mastertaenia]

payment sent for u87 taper

 

[Phrazemaster]

PCB's arrived, thanks Dan!

 

[bastrika]

payment sent for 1 D-U67 MKBV12  and u87 taper .

Thanks Dan

 

[poctop]

Shipped 
thanks
Dan,

 

[madreza]

Received !
Thanks my friend
Cheers
( and .... great work )

 

[poctop]

Shipped , 

Thanks
Dan,

 

[franckboxe]

hi

payment sent for 1 D-U67 AMI/Ext

yeah

 

[bastrika]

Pcb  received 

Thanks Dan !

 

[poctop]

Shipped 

Thanks,
dan,

 

[potstweaker]

PCB arrived today 

thanks!!!!!!

 

[earlfsmith]

Payment sent for two D-U67 AMI/Ext.  Looking forward to getting them.

Thanks,
Earl

 

[poctop]

Shipped, 
Thanks,
Dan,

 

[franckboxe]

pcb received

thanks  Dan

 

[poctop]

Hi All, i have been shipping this morning the last order ,  the store will be open for today only and then will reopen January 7th 2013,
thanks to all of you for your interest on those project ,

Best,
Dany,

 

[poctop]

Store Closed Back January 7th,
Merry Christmas to All,

 

[poctop]

C and B  ;D  and i just survived the end of the world  8)

Merry Christmas,

Dan,

 

[dgoszillai]

ok about that european question again. i red all but  to make sure my english is good enough so i don't blow up the house. the only 2 things i have to change are :

this power transformer 546-187B20
by this one : 546-186B20

and this lamp 606-1052A6
by this one 607-1031QD1

will this fit without directly with no other modifications ? (thx for your help)

 

[wave]

ok about that european question again. i red all but  to make sure my english is good enough so i don't blow up the house. the only 2 things i have to change are :

this power transformer 546-187B20
by this one : 546-186B20

and this lamp 606-1052A6
by this one 607-1031QD1

will this fit without directly with no other modifications ? (thx for your help)

Both of those substitutions will work fine.

Dave

 

[poctop]

So these are the final Version , the square version (44mm * 48mm) should fit the gt-2b style , and the round version is 60mm diameter should fit upcoming riggler mic body 
i have been able to fit 2 mounting hole as per riggler drawing of 5.05mm mouting , i am to produce gerber at the moment so i will probably run a very small batch of those , so if any interest let me know ,  this will be an experiment for sure ,  there is 2 versions of each to accomodate the M49b and M49c version.

Stay tuned ,

M49b mini driver round  Note : the Bypass cap will go underneath the first plate as it is not show here only connection point ,

M49c mini driver round

M49b mini driver square

M49c mini driver square

 

[Studio Mollan]

Just a question about the m49 builds. In order to build these you need to get your hands on a ac701 right? Pretty expensive for the DIY community... Any chance of a mod to use ef86 or something similar?
/
Emil