Vintage Tube & Vintage FET Microphone PCB Kit For DIY & New D7 Custom Capsule

[micaddict]

Studiosteve wrote:

Hello

I have a question please: will the D-47FET microphone be a multi-pattern mic, or cardioid only?

Thanks!

Supercardioid only.

 

[poctop]

Shipped to to US and UK,
Best,
D

 

[duantro]

Hi Dany, I'm finally getting your D7 capsule ready to install in a m49 build, and was curious if I need to remove the tape that runs around the D7 perimeter, or if it is for isolation. I don't see it in any of the photos, but thought I'd ask.

 

[duantro]

Here's the photo per your request.

 

[poctop]

Hi Dany, I'm finally getting your D7 capsule ready to install in a m49 build, and was curious if I need to remove the tape that runs around the D7 perimeter, or if it is for isolation. I don't see it in any of the photos, but thought I'd ask.

Thanks for the Photo ,
The tape is a special tape that protect The membrane edges and it must stay there. DO NOT REMOVE THE TAPE IN ANY CIRCONSTANCES    

 

[poctop]

Shipped today , US, Germany, Australia,
Best, 
Dan,

 

[duantro]

After finishing my m49 with your d7 capsule, I've got to say it sounds fantastic. I have built Mics with Beesneez k7's  (2- Mk7's, u47 with Ef14,  Beesneez k12 in Elam 251, and vintage oktava mk13 capsule in Oliver's c12 conversion circuit) and yours seems to beat out all of them.  Larger than life and very smooth balanced. Im very happy with my purchase!

 

[poctop]

Store will be closing for 3weeks end of May 31 business hour ,
I will process all order from today only,
Moving to New location,

Best,
Dan,

 

[poctop]

Shop Closed ,
thanks,
Best, 
Dan,

 

[poctop]

Hello Dan,

I wanted to buy your capsule D7 and the square D49 PCB but paypal just told me that you’re out of stock.
When will it be possible to order?
By the way I tried to email you from your site, but the mail came back undelivered, and your Groupdiy box is reported to be full...

Thanks,

Best regards,


Rémi Bourcereau
Ingénieur du son

Hi All,
Move is completed.
Thanks All for your patience.
Shop is back online.

I can be contacted here

email icon
http://www.vintagemicrophonepcbkit.com/Contact.html

or by Personal Messaging system inside the GroupDiy.

Thanks,

 

[poctop]

Back to capsule building after a long break , 
Thanks for your patience,
Best,
Dan,

 

[poctop]

Hi All, Proudly Presenting the Cinemag BV11 Transformer Many thanks To Dave at Cinemag to take the challenge.
for all  DIY Microphone Requiring a BV11 Style Transformer  8)

For All information about this transformer and ordering
http://cinemag.biz/contactus/contact_us.php

The Cinemag CM-6511 ( BV11 Mic output X-Transformer)

Connection

For All information about this transformer and ordering
http://cinemag.biz/contactus/contact_us.php

 

[MediaWorksOKC]

Has it been considered to do a second version of the 3 switch PCB that allows the switches to be more recessed and "almost" flush with the 67/87 style bodies, to where only just the very tip of the switch is barely above the surface of the body, just enough to comfortably use? 

 

[poctop]

Shipped to US, Today, 
Best,
Dan,

 

[3nity]

Salut Dan.
Je ne sais pas pourquoi ton email rebondit a chaque fois!
appel moi stp.

 

[poctop]

Thanks to All,
Just a notice to announce that the special Price for D7 capsule is no longer in effect.
Thanks ,
Best
Dan,

 

[poctop]

D87M PCB should be back in stock this week , 
Thanks for your patience ,
Best,
DAn,

 

[poctop]

Thanks For your Patience ,
all pending order left this morning ,
Best,
Dan,
www.vintagemicrophonepcbkit.com

 

[poctop]

All Order Left the Desk this morning , 
Thanks All,
Best,
Dan,

 

[poctop]

All pending leaving tommrow morning ,
thanks All,
Best,
DAn, '