ToniTonmann
Member
Hello everyone,
i'm sure this has been discussed already, but still i can not find clear info about this.
I was wondering which cable you are using for internal wiring ? Is there some go-to-brand that you would recommend ?
(ideally available in germany)
For my last project i ordered some microphone cable from Conrad Electronic, and it turned out to be of rather poor quality (insulation, screen). I'm particularly looking for cables to wire 31pin Eurorack-Connectors to XLR connectors and also 24V cables (in-and outside the case). Also, on the pre-wired connectors done by the pros (which i'm obviously not ), there are those bridges made of rigid wire (inter-connecting the 'ground' pins of each module), could anyone guess what wire was used there ?
In summary i'd highly appreciate some advice in chosing:
- cable for mic level signals
- cable for line level signals (if any difference ?)
- cable for 24V lines (diameter?)
- cable/wire for bridging pins
many many thanks in advance !
i'm sure this has been discussed already, but still i can not find clear info about this.
I was wondering which cable you are using for internal wiring ? Is there some go-to-brand that you would recommend ?
(ideally available in germany)
For my last project i ordered some microphone cable from Conrad Electronic, and it turned out to be of rather poor quality (insulation, screen). I'm particularly looking for cables to wire 31pin Eurorack-Connectors to XLR connectors and also 24V cables (in-and outside the case). Also, on the pre-wired connectors done by the pros (which i'm obviously not ), there are those bridges made of rigid wire (inter-connecting the 'ground' pins of each module), could anyone guess what wire was used there ?
In summary i'd highly appreciate some advice in chosing:
- cable for mic level signals
- cable for line level signals (if any difference ?)
- cable for 24V lines (diameter?)
- cable/wire for bridging pins
many many thanks in advance !