If i was to do the 2001 Mod can someone check if i am on the right direction?
Royer MXL 2001 Mod BOM
Mic circuit
C1 - 0.1uf 250v (1429-2104)
C2 - 1uf 250v (1429-2105)
R1 - 750 ohm (299-750-RC)
R2 - 22M 1/4watt (291-22M-RC)
R3 - 3M (293-3M-RC)
R4 - 2M (293-2M-RC)
R5 - 100k (291-100K-RC)
J1 – 5 pin XLR male
T1 – Jensen DB-E uncased or Cinemag CM-2480
V1 – 5840 subminiature tube
Power Supply Circuit
F1 – ½ amp fuse
D1, D2, D3 – 400x diode (512-1N4004)
C1, C2, C3 – 2200uf 35v electrolytic (140-XRL35V2200-RC)
C4, C5 – 33uf, 100v electrolytic (140-XRL100V33-RC)
C6, C7 – 33uf, 160v electrolytic (140-XRL160V33-RC)
R1 – 100ohm, 5W (280-CR5-100-RC)
R2 – 82ohm, 5W (280-CR5-82-RC)
R3, R4 – 4.7k, ½ W (293-4.7K-RC)
T2 – 24VAC, 1 amp (XR-2450LED)
And then i would follow this http://recordinghacks.com/articles/one-tube-microphone-from-berlin/
and this : http://crodog.org/tubemic/tubemic.htm
Am i good to go?
Or does anyone has suggestions for the values or circuit?
I am going for a u47-ish sound. A mic to use on my vocals, here is me singing : http://www.youtube.com/watch?v=hWXuR7qmfew
A mic that would have a nic bump around 4khz but not harsh in the highs...
THanks guys