Songguy
Well-known member
hi all,
im so close to finishing up my first DIY project! But, I'm stuck on these Vishay trimmer pot leads and pads. not real sure on the proper alignment ??? Vishay says lead A is right below screw adjust, B the middle then C. Not quite sure how to apply this info.
Rev. F schematic
http://mnats.net/files/1176REVFG_SCHEMATIC.pdf
please check out my oriinal post here with Trimmer pot photo:
http://www.groupdiy.com/index.php?topic=33834.msg541068#msg541068
Please any clarification, anyone?
Chris
im so close to finishing up my first DIY project! But, I'm stuck on these Vishay trimmer pot leads and pads. not real sure on the proper alignment ??? Vishay says lead A is right below screw adjust, B the middle then C. Not quite sure how to apply this info.
Rev. F schematic
http://mnats.net/files/1176REVFG_SCHEMATIC.pdf
please check out my oriinal post here with Trimmer pot photo:
http://www.groupdiy.com/index.php?topic=33834.msg541068#msg541068
Please any clarification, anyone?
Chris