Dan's front panels and cases.. new panels for Gustav's projects, 1U CLX-VU panel

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

ddt

Well-known member
Joined
Jun 14, 2004
Messages
274
Location
Prague
Hi everyone!

I've got some rack cases and front panels available for sale, these should make a lot of projects a lot less painful as most of the metalwork's done for you. You can buy the cases or the front panels separately.

The cases have:

- Holes for an EMI filtered power connector on the rear panel
- Four holes for XLR connectors on the rear panel

The cases are approximately 44 cm wide and 28 cm deep, the internal height is about 39 mm. The cases have 1.5 mm thick lids so that contersunk screws can be used, keeping the outside of the enclosure clean. A 1U case + front panel weighs less than 2kg including packaging so it can be posted quite cheaply.



Here's what I currently have:



EZ1073 case for Colin's (Slenderchap) project... 99 EUR including Worldwide postage! - Neve type blue/grey colour



EZ1084 panel... 32 EUR + postage

Full case including worldwide postage = 95 EUR


2U EZ1084 panel - brushed Aluminium with laser engraving... 35 EUR + postage

Full case including worldwide postage = 122 EUR


EZ1290 panel for madriaanse's project... 32 EUR + postage - Neve type blue/grey colour
The panel's designed for the JLM GoBetween.

Full case including worldwide postage = 95 EUR


2x 1176 panel... 35 EUR + postage

Full case including worldwide postage = 122 EUR


1U 760 panel... 42 EUR+ postage

Full case including worldwide postage = 102 EUR


2U 760 panel... 47 EUR+ postage

Full case including worldwide postage = 144 EUR


2U G9 panel... 35 EUR + postage

Full case including worldwide postage = 122 EUR


2U Pultec panel for NRG Frank's project... 35 EUR + postage

Full case including worldwide postage = 122 EUR


1290 panel...32 EUR + postage - Neve type blue/grey colour

Full case including worldwide postage = 95 EUR


1272 panel...32 EUR + postage - Neve type blue/grey colour

Full case including worldwide postage = 95 EUR


GSSL panel... 32 EUR + postage - blue/grey colour.

Full case including worldwide postage = 95 EUR


W492 panels - silver brushed Aluminium + Al mounting panel... 2x W492 plates + 2x rear mounting plates... 32 EUR + postage



____________________________

New additions:

2U Stereo PQ1549 EQ panel - brushed Aluminium with laser engraving 35 EUR + postage

Full case including worldwide postage = 122 EUR
Don't have the PCB? Ask Lukas! http://groupdiy.com/index.php?topic=62360.0
(the artwork's here: http://www.gyraf.dk/gy_pd/calreq/calreq.pdf)


1U XS902 De-esser panel - brushed Aluminium with laser engraving 32 EUR + postage

Full case including worldwide postage = 95 EUR


1U Nite EQ panel + sub panel - brushed Aluminium with laser engraving 40 EUR + postage

Full case including worldwide postage = 103 EUR


500 series Audiox196EQ panel + L-bracket 29 EUR + postage



1U CLX-VU panel - brushed Aluminium with laser engraving 32 EUR + postage

Full case including worldwide postage = 95 EUR


2U M/S VECA panel - brushed Aluminium with laser engraving 35 EUR + postage

Full case including worldwide postage = 122 EUR


1U Hand Of Light panel - brushed Aluminium with laser engraving 32 EUR + postage

Full case including worldwide postage = 95 EUR


1U Symmetrical FET panel - brushed Aluminium with laser engraving 32 EUR + postage

Full case including worldwide postage = 95 EUR





Front panel postage costs:

- 1x 1U panel = 7 EUR
- 2x 1U panels = 9 EUR
- up to six 1U panels = 14 EUR


Ordering:

You can send money through Paypal of by bank transfer, please email me at dan.ddt -at- email.cz first to confirm availability and the total amount.

If you want to be original with your front panel designs (and you should), you can also get your panels done here http://www.groupdiy.com/index.php?topic=27917.0 or here (scroll down a bit for English) http://www.nrgrecording.de/nrg/viewtopic.php?t=971. Or email me at dan.ddt -at- email.cz for a custom panel.

Thanks,
Dan
 

ddt

Well-known member
Joined
Jun 14, 2004
Messages
274
Location
Prague
[silent:arts] said:
Dan, nice designs, nice service :)

let me know if you take custom case orders  ;)

Thanks Volker!

Sure, send me an email of what you'd like!

Dan
 

phatmateo

Well-known member
Joined
Dec 10, 2008
Messages
238
Location
Chicago, IL
Looks great Dan!  What other cases/panels do you have planned?  Would it be possible to get a version of the GSSL with the super sidechain mod?
 

Skylar

Well-known member
Joined
Sep 16, 2005
Messages
1,021
Location
Irvine, CA
Dan made a couple of custom panels for some projects of mine...

They are excellent, and I highly recommend his work!
The silk screening is crisp and clear.
The metal work is perfect.
The paint is clean and even.

[I will try to post some images here]



On a side note, Dan, I noticed this post isn't stickied.
I just wanted to make sure you contacted the moderators before posting in the White Market.
I've seen a few posts in here removed because they didn't contact the moderators and pay the fee first.

Thanks, Dan!
 

ddt

Well-known member
Joined
Jun 14, 2004
Messages
274
Location
Prague
phatmateo - I'll make a couple of Sidechained panels as well just in case anyone needs them, I might have one that I probably won't use in the near future, I'll check at home and PMail you!

Other panels.. anything and everything really;) I'll need to do a Poorman layout, something along the lines of a cool LA2A panel or case, I'd really like to try Igor's PGA2500 pres, etc..

Skylar - I've got approval to post and paid the fee, so it should be all right.. Thanks for the kind words and for the heads up!!

stereokillah - Edit... They are now :)

Cheers,
Dan
 

diyfanatic

Well-known member
Joined
Oct 15, 2008
Messages
502
Location
Paris, France
Hi Dan,

great cases...

maybe you should think of selling back panel alone too...
metal work are so pain full...it could be a best seller
1U/2U, stereo and mono.

cheers
Jr.
 

Rob Flinn

Well-known member
Joined
Jun 3, 2004
Messages
4,878
Location
Sussex, UK
I have used Dan's panels on several project's & can recommend them as being great quality, & I think fairly priced.
 

okgb

Well-known member
Joined
Oct 18, 2004
Messages
5,872
Location
Winnipeg Mb Canada
Likewise Dan made a couple custom  [ with my name on them  ] panels
quite happy with the all around service
Gotta get a PM 670 , Hint hint
 

desol

Well-known member
Joined
Jun 20, 2005
Messages
2,089
Nice cases Dan...love the plain black. Can't wait to see the TG's.
 

Whoops

Well-known member
GDIY Supporter
Joined
May 9, 2008
Messages
7,116
Location
Portugal
Well Done Dan.

I would like to share here that Dan is a wonderful and honest person.

The prices are also quite good.

Thanks a lot mate.
 

ddt

Well-known member
Joined
Jun 14, 2004
Messages
274
Location
Prague
Aww, thanks everyone...!!

diyfanatic - that's an interesting idea actually, but I probably won't get round to it any time soon - it would mean quite a bit of research into the various cases that are on the market, etc.

dandeurloo - Drip Projects... that would be pretty cool, I'll email him to see if he'd give me permission.

d.


 

MartyMart

Well-known member
Joined
Feb 28, 2006
Messages
2,340
Location
Berlin for a while
One more BIG thumbs up for Dan's work, he did me some GSSL fronts and a few
custom things, all were fantastic :)
We even met for a drink in Prague, totally nice chap !

Cheers,

Marty.
 

mac

Well-known member
Joined
Jun 5, 2009
Messages
663
Location
Sunshine Coast, Australia
Hey Dan,
Great work and thanks for offering this on here.

I am keen to see pics of the GSSL with the super side chain if possible?

thanks again, Mac ;)
 

ddt

Well-known member
Joined
Jun 14, 2004
Messages
274
Location
Prague
Hi guys.. !

I've started on a couple of new panels: GSSL with sidechain, a couple of GSSL panels for with a Sifam PPM meter cutout (both regular and sidechain panels), a 4 channel mic pre panel... and 2U TG panels, finally ;)

I've also got a couple of spare G9 panels for sale, I've added the photo to the first post. The colour of the panel's dark green, almost black.

If anyone knows they'll need any of the above, please let me know, I'm not making that many of them this time around.



nashkato... Thanks! I've posted your panel yesterday.

ChrioN... Yes, the back panels are silk screened now :)


Thanks,

Dan
 
Top