Feeler for D-47FET PCB for Alctron U47 type Donor

[poctop]

Feeler for D-47FET PCB for Alctron U47 type Donor


it would stand piggy with keystone brackets .
http://ca.mouser.com/ProductDetail/Keystone-Electronics/621/?qs=sGAEpiMZZMsQtlBhqKq43RRKyy%2fQ5h95

with transformer Support For Cinemag Fet Classic Reproduction
http://cinemag.biz/mic_output/PDF/CM-13101.pdf

BOM with Screws and Brackets
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=4bdecadc37


it could be an alternative for those who cant handle tubes yet , Simple FET design, Self Bias,  with the nice feature of the U47 Style Mic body. But Still a Classic Mic.

Let me know
Best,
Dan,

 

[micaddict]

How about a stereo U47fet?

 

[micaddict]

I didn't mean to hijack BTW.

Nothing at all wrong with a U47fet in a long body. 

 

[poctop]

I didn't mean to hijack BTW.

Nothing at all wrong with a U47fet in a long body. 

No Worry Henk,
if you meant a stereo pair yes 
best
Dan,

 

[poctop]

I went ahead and printed a couple (10) of these anyway just in case someone would like to try them out  in a long term future,
Best, 
Dan,

 

[Guff]

Dan, I'd like one of these boards when available. Thanks

 

[Upacesky]

I don't really get the difference between this version and the one you already sell in your store.

 

[poctop]

I don't really get the difference between this version and the one you already sell in your store.

This version has been reworked for on board support for transformer ( Cinemag 13101 Footprints) , and also the footprints have been adjusted in consequence to fit the alctron 47 mic body in a piggy back style pcb configuration ,  the footprints and clearance allows installation of keystone mouting bracket inside the railing . In short they a similar but not the same.
Best,
Dan,

 

[Guff]

Dan, did you receive these boards? I never saw them put up on the web store.

 

[poctop]

Hi Guff, i just did not have time to picture them and introduce them in the webstore yet but i have em here , if you need some PM me.
Best,
Dan, <

 

[tonycamp]

where do you get the actron u47 mic body? i haven't seen one available yet?

 

[poctop]

Mic body for this project are now available here


http://store.studio939.com/category/microphones-and-parts

http://groupdiy.com/index.php?topic=50015.880

http://groupdiy.com/index.php?topic=58609.0

 

[benqbasic]

Is this PCB still around?