maxwall
Well-known member
- Joined
- Nov 17, 2004
- Messages
- 1,134
Hill Audio Ltd. Remix recording console 24/8/16/2
Received this board with no power supply and I cannot locate any free schematics or find any
information on the wwweb for Power supply voltages. I plan to build my own outboard power supply.
I think the voltages are +/- 17 , +48 and possibly 5Vdc for leds, not sure. If I can get the correct voltages for this power supply , than I can build a supply for the board.
Any help appreciated.
If there any spare parts around I need :
1. two black VU meter bezels ( Compex 2LX type ) same as trident 24 console.
2. (1) 100 mm slider push on knob, white body black line, fits 8mm x 1.2mm tang.
body is 26mm long x 10mm high x 10mm wide, part# 02/LK151 01 Sifam brand.
3. (1) round 10mm top, two color w/pointer gray top with d shaft 4mm , Sifam brand.
4. (1) pot for aux level control ( 4mm d shaft, push on type).
5. Neutrik 5 pin XLR male, cable end type.
Finally found it , thanks
Received this board with no power supply and I cannot locate any free schematics or find any
information on the wwweb for Power supply voltages. I plan to build my own outboard power supply.
I think the voltages are +/- 17 , +48 and possibly 5Vdc for leds, not sure. If I can get the correct voltages for this power supply , than I can build a supply for the board.
Any help appreciated.
If there any spare parts around I need :
1. two black VU meter bezels ( Compex 2LX type ) same as trident 24 console.
2. (1) 100 mm slider push on knob, white body black line, fits 8mm x 1.2mm tang.
body is 26mm long x 10mm high x 10mm wide, part# 02/LK151 01 Sifam brand.
3. (1) round 10mm top, two color w/pointer gray top with d shaft 4mm , Sifam brand.
4. (1) pot for aux level control ( 4mm d shaft, push on type).
5. Neutrik 5 pin XLR male, cable end type.
Finally found it , thanks
