gaconvn1106
New member
- Joined
- Feb 28, 2019
- Messages
- 1
Hey all,
I almost completed this entire build about 5 years ago, and am finally wanting to finish, and I’m running into confusion and lack of understanding with regards to how to measure and connect the 5 “legs” of the power supply. My situation is specifically:
-pre PCB is built according to K&K schemo
-PSU PCB is built, using a Hammond 269JX, an NTE5326 rectifier, and a large black circular capacitor that says something like jV 500V, -10% +30%, and 0 -20M.
-My question is what voltages and which leads should be connected to the Mic Pre PCB from the PSU?
I’ll be attaching the PSU docs here as soon as I can but I’m not at my desktop. Please let me know if and what I can further provide to help clarify this.
Best,
GC
I almost completed this entire build about 5 years ago, and am finally wanting to finish, and I’m running into confusion and lack of understanding with regards to how to measure and connect the 5 “legs” of the power supply. My situation is specifically:
-pre PCB is built according to K&K schemo
-PSU PCB is built, using a Hammond 269JX, an NTE5326 rectifier, and a large black circular capacitor that says something like jV 500V, -10% +30%, and 0 -20M.
-My question is what voltages and which leads should be connected to the Mic Pre PCB from the PSU?
I’ll be attaching the PSU docs here as soon as I can but I’m not at my desktop. Please let me know if and what I can further provide to help clarify this.
Best,
GC