microphone pattern q: 1/2 of figure 8 VS. cardioid

[Marik]

[quote author="Tim Campbell"]There's a lot of great info in this thread. Are any of you planning on building one of these type capsules?

Though the idea is good, this design could be a nightmare to get to function properly in a real capsule.[/quote]

Tim,

I would, especially that I am getting a CNC rotary table. The problem is at the moment I don't see how potentially to make it work in fig8, or overcome a problem with diaphragm tension in omni. That's where the resonator comes to work. BTW, the MK6 goes only to 16KHz.

 

[Guest]

[quote author="Tim Campbell"]Though the idea is good, this design could be a nightmare to get to function properly in a real capsule.[/quote]
Minimally that the holes must rise in diameter linearly with distance
from capsule middlepoint.
For design can be useful classic M8 (Ne*mann)., or all that
basic old group (M7 (cardioid), M8(fig. eight), ???(?M50? M5? /I am too lazy to look to Neumann prod info/ omni). I think, the all group can be done in one capsule.

xvlk