MixBuzz1: full-featured 1RU bus compressor. Pre-orders : pls update, page 6.

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Have to separate it to different posts.

OK than...
There will be a single run of 50 pcb sets and 20-25 kit sets.
Basic parts kit will include everything to bulld kinda improoved GSSL+turbo compressor.
All resistors/diodes/capacitors/IC's/Lorlin switches/relays/pots/
4x THAT2181B VCA's/all power supply parts. Molex connectors will be included.
Additions:
SC filters (all parts+Lorlin switch +ribbon cables, connectors)
MIX, or C&B (all parts + dual 10k pot+Mogami shielded cable)
LED meter (all parts, THAT2252, 4x 10-led bargraphs).
Meters are not coming with kits. Hairball audio.
Toroidal power transformer are not coming with kits.
Knobs,IEC socket, power switch are not supplied too.

EAO lenses with engraving : MIX, SC MONO, COMP IN, POWER: for free on request with PCB's.
Please let me know which lenses you need. I have about EAO 80 lenses and
if you need only 2 lenses, let's let another member to get them :)

The pricing for 20-25 kits comes a bit higher than I thought, anyway,
it is still in good range. Great quality components will be used.
The kits will be done in "logical" way, i.e. all resistors for
control part in one bag; all power supply bypass caps in another bag;
another bag for audio capacitors, etc.

PCB set USD60
Basic kit add USD210
SC filters add USD35
MIX, or C&B add USD40
LED meter: add USD55
Soundpath upgrade to 2xOPA604+6xTHAT2181B: add USD62
Shipping and paypal fees included.

All profit from PCB's will be donated to this forum.

Front panels: factory gave me pricing for minimum order of 50...
However, I looking for another way to bring the price down as possible.

PCB's and kits have to be pre-ordered.
Shipping-around 15th November.

It is OK to pay from now.

Here is the orders list. You can update it till I order the kits parts at Oct, 10th.

You can add your name for kits till October 10th.

Benny-?
EEMO1-?
Holger-1 pcb set-?
funball2-5pcb sets-?
briomusic 1x pcbs set + Basic kit/SC filters/C&B/LED meter.
baadc0de 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
Infernal_Death 1 PCB set
zayance 1x pcbs set + Basic kit/SC filters/C&B/
benlindell 2x pcbs set
detonator 1 PCB Set
waldorfcave 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
Entropia Cub 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
dk329 one pcb set
stereokillah 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
evilcat 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
reddwarf 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
Purup 2 PCBs.
DanH  1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
haima 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
kml23956 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
mata_haze ONE f1x pcbs set + Basic kit/SC filters/C&B/Soundpath upgrade
dagoose 1x pcbs set + Basic kit/SC filters/C&B
Winetree 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
SKJGProject 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
rrs 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
jandoste 1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade
 
hmm, i need all the PCB's but no need parts, i'll choose and will use my stock when time to build, so what is the price for all PCB's?
Or maybe all options comes in kit?
Thanks
 
What is the name of the Horowitz-Hill book that explains the hard/soft knee?
I'm very interested in this also... I have "Art of Electronics", but I have no idea where this figure would be in the book
Ah yes, and another one-at this time, RATIOS!
http://i251.photobucket.com/albums/gg291/diy33609/HOROWITZ_HILL_SSL.jpg
 
Q and A's.

-does the $200 kit include pcb or does this go on top pricewise?
Answered in previous post
-can i start with just one 2181A and add 3 more (from farnell/RS/etc)
at a later stage, if I feel it is needed?
I recommend to use B grade VCA's from same batch.
A grade not worth additional bucks.

Lastly - are you offering front panels or is this up to the buyer?
I trying to figure out cheap solution, but minimum order is 50 panels.
There are case and manufacturers at this forum. I don't want to take their bread as well :)

Igor, can you be more specific? Are these EAO series 01 switches you're talking about?
I used ones marked 01-281....yes, it is old good 01 family.

and would like C&B for mixbuss 500
MS, C&B for MB500 will be offered later. I don't count much orders for this, but will
do it for my 51X rack, so, no prob here.
Will there be a full case available for this build where there will be no holes required to do and is exact for the fully expanded model?

Same like panels. If there will be interest in at least 25 cases, they will be offered.
I can make 50 panels and use 15 of them, as I have at least 12 local customers
for full-featured MixBuzz. BTW, I got great feedback about sound from 4 of
most serious local studios here.

How difficult is the calibration process, what tools will you need for calibration?
If everything soldered correct...yes, you can go with soundcard and multimeter, it takes 20-40 min to setup. I recommend oscillator, scope, good Fluke even for simplest project to be at safe side.
BTW, I recommend good soldering iron as well :)

Igor, how is the build manual on this like? Is this build, newbie friendly?
Support thread+full documentation. Newbies...is my PITA, but basic version is very friendly.

What will you supply with it regards to a build manual? Will it just be a schematic, or will you have step by step process?
Schematics, pcb stuffing guide, support thread. Docs will be posted sooner.

That so called blend knob, is that like the API 2500 version of mixing the same signal that's compressed with the original signal?
Yes, it is mixing clean with compressed.

What exactly do you mean by not GSSL clone? How does this sound compared to a GSSL?
There will be long post dedicated to this with full explanations why.

And what about the meters : are they include in the full kit ?
Hairball. Perfect service, good meters.
PERHAPS is asking too much (after the C&B and the M/S options) but...
any chance for an optional OUTPUT transformer?

Take a big case, do output stage with kinda 2520+trunny, why not.

I already working on adding another small PCB with peak/avg crestfactor and timing...

Yes :)

Igor, M/S would be a must!
Sorry, MixBuzz1 has only MIX option. Full-featured MS and S&B will be done in 500 format.

What is the name of the Horowitz-Hill book that explains the hard/soft knee?

Art of Electronics, the part about op-amps.
I have Russian 2nd edition, it is bit different.
Can post detailed info on request.
 
Duh...have to go, we doing some BBQ with friends, it is holidays there.
More-tomorrow.
Yes, it is possible to retract the orders for kits, no prob, but check the pricing at your side before.

PCB set priced for FULL FEATURED PANEL. All is in.
 
jandoste   ->  1x pcbs set + Basic kit/SC filters/C&B/LED meter/Soundpath upgrade PAYPALLED

Edit : Sorry I didn't send you my adress and my DIY user ID Sad
Sent it by mail!
cheers,
 
I have a question, which I am sure can not only be answered by Igor - maybe someone else can help while he's at his BBQ  ;D

the MS option - is that something that could be done externally, like "Crush and Blend"? I mean, there are many ways - soft and hardware - to convert LR to MS and back again, can I just strap those on the in and output of the MixBuzz1 (or indeed any compressor) or is the plan to provide different (Ratio- Threshold- etc) controls for the M and S channels?

Thanks for any explanation.
 
MIX, or C&B OR dry/wet  dry your are compressor in bypass off  / wet your are in bypass between you have compressed and bypassed song together.


SC MONO = internal sidechain mono = one vca sidecahin for two channel
 
I could be interesting in front panel (the one with LED meter, MIX, soft/tight, dual...) and case.
Now some questions :

1 - what about the scale of the Led meter in GR mode ? If it's 2 dB per led like in Vu mode, isn't it to be a too small definition ? Or is it easy to work with anyway ?

2 - Does the basic kit includes additional ratios (1.5, 6, 8), soft/thigh and dual switches ?

3 - what about the Att/Rel : are they stepped ? are they continuously variable ? independent, dependent ? How do you deal with that ? What does the kit includes ?

Thanks,

Ben.
 
Hi Igor,

PCB, basic kit, SC filter, Mix, Led meter, Sound path upgrade Paypaled.

;D

Thanks ...can't wait!

Krivium.

basic kit do not include soft thight

rms/peak behavior futur upgrade? Make sense?
 
stereokillah said:
this is what i understood:

att and realease could be stepped or potentiometer

basic kit do not include soft thight

I know that att and rel can be stepped or pot, but what kind are they in the kit ?

Thanks,

Ben.
 
Does it have footprint for DBX 202 or 2001 instead of THAT VCA?  (Any changes needed, or plug and play?)

Are all the extra PCBs included in the USD 60?

What are EAO lenses?  (Is this an engraving template?)
 
Back
Top