OPEN SOURCE DIY Mic Project - ORS 87 - Stripped Down u87

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
@khalidgul ,
We all sincerely want to help you, but first of all you have to help yourself, learn, study, evolve.
I agree with @Khron .
I recommend you read this thread carefully.
Since the ORS 87 and ORS87+ are variations of the U87i Vintage I recommend you also study the thread:

https://groupdiy.com/threads/neumann-vintage-u87-clone-build-thread.48030/

You will find the answers to all your questions.
I don't see any other effective way to learn.
 
That tells me, quite certainly, that you didn't bother to read through even half of this thread..(?)

Otherwise, you might have stumbled across this:

https://groupdiy.com/threads/open-source-diy-mic-project-ors-87-stripped-down-u87.86814/post-1156442
@Khron boss the build got me excited, I read through halfway and involved in building, thanks for the link, will read through the entire thread.agreed and appreciated @micolas thank you very much indeed for the link, will do as you say.
 
Question for the brain trust here.

I've got some TSC-2 cartridges here and I'm curious about patterns other than cardioid. Is this basic circuit capable of powering both sides of a cartridge or is additional circuitry required?

And between omni and figure 8 my guess is that omni would have the rear face reverse phase (both diaphragms moving the same direction) and figure 8 having the rear face moving independently from the front. Or maybe I've got that backwards, but those are really the only ways I can see to connect the cartridge with two faces and a common back plate.

Is any of that correct?

eso
 
Question for the brain trust here.

I've got some TSC-2 cartridges here and I'm curious about patterns other than cardioid. Is this basic circuit capable of powering both sides of a cartridge or is additional circuitry required?

And between omni and figure 8 my guess is that omni would have the rear face reverse phase (both diaphragms moving the same direction) and figure 8 having the rear face moving independently from the front. Or maybe I've got that backwards, but those are really the only ways I can see to connect the cartridge with two faces and a common back plate.

Is any of that correct?

eso
You may want to build a full U87ai clone. For example U87 Fuchs.
✨
Could you please post some pictures of the TSC-2 capsule?
(Looks like JLI sent something else instead of TSC-2)
 
Is this basic circuit capable of powering both sides of a cartridge or is additional circuitry required?

If you MacGyver a pattern switch somewhere somehow, you could have access to omni, in addition to cardioid.

Otherwise, you will indeed need a "full fat" U87(A) circuit.

You may want to build a full U87ai clone. For example U87 Fuchs.

Heeeeeey!... :D
 
The yellow and black wire is a TC2 Taskar capsule. The the red and blue wire is a JLI same as TZT Ali Express capsule or Alibaba Getwin. The CTS-2 in the AKG P220 or P420 , the capsule wire is yellow. JLI you make beautiful Alice circuit.I would buy from Vami if you want the real TC2 Taskar K87 or CTS-4 C12 capsule. Best. When I have have a little more time I will build the ORS87 V1 with a JLI and and one with the Taskar. Best. Thank you again for all this beautiful project. Can’t wait to put my hand back into Microphones DIY. https://vamisound.com/shop/
 

Attachments

  • 93348639-FC00-4F9B-998E-6AD533295EE0.jpeg
    93348639-FC00-4F9B-998E-6AD533295EE0.jpeg
    1.4 MB
  • 6DC0F437-AA99-49B7-A8B1-978EDD90D2F0.jpeg
    6DC0F437-AA99-49B7-A8B1-978EDD90D2F0.jpeg
    1.4 MB
Oooh, so does this mean that JLI is NOT selling actual Takstar capsules, despite the persistent rumor that they are? If they're not, I'd like to retract a statement I made on camera saying they do. (Which was based upon something Jules Ryckenbush posted that I had read a long while back detailing a conversation he had with JLi's owner--I can't find the link to it presently)
 
Also just took a much closer look at my AKG P420 and yes, the capsule looks more like @Papa Tango Charly 's image with the protruding screw heads from the bezel...

Looks like what JLI send out doesn't match the image on their website? Which does look much more like the Takstar.

It does look quite a bit like the RK-87 from micparts though?
 
Last edited:
You may want to build a full U87ai clone. For example U87 Fuchs.
✨
Could you please post some pictures of the TSC-2 capsule?
(Looks like JLI sent something else instead of TSC-2)
GhostlyStudio's Picture above ^^^^ is identical to what I received right down to the plastic box and bag with the PB leads and mounting screws.

eso
 

Attachments

  • Screenshot_2024-07-10-03-14-49-758_com.android.chrome.jpg
    Screenshot_2024-07-10-03-14-49-758_com.android.chrome.jpg
    599.2 KB
  • Screenshot_2024-07-10-03-12-34-219_com.android.chrome.jpg
    Screenshot_2024-07-10-03-12-34-219_com.android.chrome.jpg
    537.9 KB
  • Screenshot_2024-07-10-03-16-48-280_com.android.chrome.jpg
    Screenshot_2024-07-10-03-16-48-280_com.android.chrome.jpg
    746 KB
Oooh, so does this mean that JLI is NOT selling actual Takstar capsules, despite the persistent rumor that they are? If they're not, I'd like to retract a statement I made on camera saying they do. (Which was based upon something Jules Ryckenbush posted that I had read a long while back detailing a conversation he had with JLi's owner--I can't find the link to it presently)
@Wordsushi
I'd like to reach out to you regarding a project, but I can't start a private conversation for some reason... can you contact me by private message please? thank you
 
Here's one of mine...

So, what would be the next preferred capsule in the lower price range?

eso
So your capsule is not Takstar CTS-2?

I am wondering as you wrote in earlier post:

"...I've got some TSC-2 cartridges here and I'm curious about patterns other than ..."
 
These capsule JLI TSC - 1 from JLI looks like the Ningbo. The same one they are selling at microphone part. 31$ JLI TSC - 1 from JLI is not the price they selling they capsule at Ningbo, i'm telling you! If you and me want to buy a capsule at Ningbo you are going to pay much more unless you buy large quantities.
Getwin are making cheap copy of Ningbo K87 and C12 i have bought them all at JLI and at Getwin.
They are copies Ningbo K87 or C12. They don't sound the same as the Ningbo.

See for yourself please

https://www.alibaba.com/product-det...offerlist.normal_offer.d_image.54e31ef5dGVvcE

https://www.alibaba.com/product-det...offerlist.normal_offer.d_image.54e31ef5dGVvcE

https://www.alibaba.com/product-det...offerlist.normal_offer.d_image.54e31ef5dGVvcE

https://www.alibaba.com/product-det...l?spm=a2700.shop_plgr.41413.41.22757121QBEnrA


Same copies on Ali express for 14$
https://fr.aliexpress.com/item/1005006836289967.html?spm=a2g0o.productlist.main.17.1dafW6hBW6hBVD&algo_pvid=8d803f64-0206-4ee3-a477-b9102418d6b1&algo_exp_id=8d803f64-0206-4ee3-a477-b9102418d6b1-8&pdp_npi=4@dis!EUR!26.32!14.74!!!27.80!15.57!@2103864c17205939186124849e44b3!12000038462554262!sea!FR!1650395965!&curPageLogUid=vmZZghyOHLFT&utparam-url=scene:search|query_from:


Ningbo capsules from Microphone Part are well known for having a bright sound and very large frequency response that can always be corrected with the ORS87 condenser. It's always good to have a wide frequency response that you can always correct and sculpt with the circuit.

Look at the C12 and K87 at Getwin and at JLI

I really wanted to share this with you for a long time because i'm tired to get scammed.

https://www.jlielectronics.com/microphone-capsules/?page=1

https://getwintech.en.alibaba.com/p...lter=null&spm=a2700.shop_plgr.41413.dbtmnavgo

Ningbo
https://www.nbmic.com/microphone-accessories.html?page=4&limit=12
http://www.xingdeaudio.com/index-1.shtml.htm



By the way, this a C12 Ali Express sounds ok, i have used them it in a KM84.

https://fr.aliexpress.com/item/1005....0.0.5260hLlphLlpwL&mp=1&gatewayAdapt=glo2fra

(WTS was a big scamed aswell because they were selling the capsules that were not validated by the Ningbo distribution chain and half of the time the K47 were collapsing and suck in :) remember?)))).


Have a good day. Best

Real Ningbo capsules.

Real Taskar
https://vamisound.com/shop/

1720591013303.png






1720590811350.png
1720590767739.png
The
 
There is a thread about Takstar capsules and I just wonder how you can see by pictures of the capsule that it is genuine Takstar (or Takstar at all)?

https://groupdiy.com/threads/taksta...dely-available-from-takstar-themselves.87540/

I will put more pics there to keep this thread focused on U87 ORS build, but...

This is what I see. If this is the Takstar home page: https://en.takstar.com/product/type/75.html

Then the CTS-2 capsule looks like this on one side (see the nr 2 on the plastic ring)

takstar_cts_2_from_takstar_home_page.png

The vamisound capsule: https://vamisound.com/capsules/cts-67/

vamisound_cts-67_capsule_1.jpg

I don't see any nr '2' on the plastic ring on vamisound capsule picture.
And on the other side of the Takstar CTS-2 capsule, there probably should be 'S' on the plastic ring.
 
Last edited:
There is a thread about Takstar capsules and I just wonder how you can se by pictures of the capsule that it is genuine Takstar (or Takstar at all)?

https://groupdiy.com/threads/taksta...dely-available-from-takstar-themselves.87540/

I will put more pics there to keep this thread focused on U87 ORS build, but...

This is what I see. If this is the Takstar home page: https://en.takstar.com/product/type/75.html

Then the CTS-2 capsule looks like this on one side (see the nr 2 on the plastic ring)

View attachment 132341

In https://vamisound.com/shop/:

View attachment 132342
That's the one!!
 
Last edited:

Latest posts

Back
Top