ChuckD
Well-known member
Hey just wanted to "RE-START" this thread as I thought it was very valuable last time. And I used it to order my Enclosure.
I got Mine at:
http://www.par-metal.com/
2U 10 series cost $49.00 US
DIYer nrgrecording has some great layouts (Gyraf stuff) pre-made at:
http://www.nrgrecording.de/html/schaeffer.html
You can send the files to
http://www.frontpanelexpress.com
For about 50-60 USD they will engrave and Drill the panel.
I just sent mine to FPExpress today I'll post the results when I get it back.
My total cost is just above 100 bucks US for a pretty slick box.
Who had some other/better/cheaper ways???
-Chuck
I got Mine at:
http://www.par-metal.com/
2U 10 series cost $49.00 US
DIYer nrgrecording has some great layouts (Gyraf stuff) pre-made at:
http://www.nrgrecording.de/html/schaeffer.html
You can send the files to
http://www.frontpanelexpress.com
For about 50-60 USD they will engrave and Drill the panel.
I just sent mine to FPExpress today I'll post the results when I get it back.
My total cost is just above 100 bucks US for a pretty slick box.
Who had some other/better/cheaper ways???
-Chuck