UA Apollo preamp knob

[inkster]

Really? Who did you have to blo... I mean bribe, to get that? They wouldn't even share the already-compiled* firmware for an 8pre...

* Compiled, as in NOT the source code, as in no IP infringement even possible, so no real reason not to.

I called

 

[inkster]

Really? Who did you have to blo... I mean bribe, to get that? They wouldn't even share the already-compiled* firmware for an 8pre...

* Compiled, as in NOT the source code, as in no IP infringement even possible, so no real reason not to.

Your methods vary from mine I guess

 

[MiamiBoy]

Just heard from Universal Audio.
This is the part number according to UA: RE111F-41B3-25F-15P

 

[NoisyIndividual]

Just heard from Universal Audio.
This is the part number according to UA: RE111F-41B3-25F-15P

Datasheet for that part here:
https://taydaelectronics.com/datasheets/files/A-6328.pdf

 

[MiamiBoy]

Nice. So that'll be the exact component, like brand and model? the 11mm vs 12mm shaft

 

[NoisyIndividual]

Yes but Im not sure you'll find one.
At least not easily.

You might have to go with whatever is available and make it fit.

Other manufacturers will make similar pots that will also fit the PCB, so you could find these data sheets too and see how close you can get to the original.

 

[MiamiBoy]

I know, they're discontinued now. So any finding is gonna be pricy.
Than you all for your inputs. This thread will be good for others if they need a replacement.