I called
UA Apollo preamp knob
- Thread starter MiamiBoy
- Start date
Help Support GroupDIY Audio Forum:
Your methods vary from mine I guess
MiamiBoy
Well-known member
Just heard from Universal Audio.
This is the part number according to UA: RE111F-41B3-25F-15P
This is the part number according to UA: RE111F-41B3-25F-15P
NoisyIndividual
Well-known member
MiamiBoy
Well-known member
Nice. So that'll be the exact component, like brand and model? the 11mm vs 12mm shaft
Last edited:
NoisyIndividual
Well-known member
Yes but Im not sure you'll find one.
At least not easily.
You might have to go with whatever is available and make it fit.
Other manufacturers will make similar pots that will also fit the PCB, so you could find these data sheets too and see how close you can get to the original.
At least not easily.
You might have to go with whatever is available and make it fit.
Other manufacturers will make similar pots that will also fit the PCB, so you could find these data sheets too and see how close you can get to the original.
MiamiBoy
Well-known member
I know, they're discontinued now. So any finding is gonna be pricy.
Than you all for your inputs. This thread will be good for others if they need a replacement.
Than you all for your inputs. This thread will be good for others if they need a replacement.
NoisyIndividual
Well-known member
The thread would be more searchable/findable for others with this issue if you edited the title from "knob" to "rotary encoder".
Oh no, a specific model of an industry-standard component is discontinued...
True, Mouser don't seem to have a drop-in replacement in stock, but whaddya know...
https://www.digikey.com/en/products/detail/bourns-inc/PEC11L-4225F-S0015/4699180
Also happens to be the cheapest fitting one they carry
Not that Bourns is a no-name in the field anyway.
