We prepare for manufacture Voice Processor

[Hand Crafted Laboratories]

We prepare for manufacture for the new device - Voice Processor/Channell strip, is possible with AD/DA converters. In all a question - what type of an equalizer is more preferable in opinion of the user? And whether the equalizer in general is necessary?

discuss about other our gears hear -
http://www.groupdiy.com/index.php?topic=8604
http://www.groupdiy.com/index.php?topic=8659
http://www.gearslutz.com/board/showthread.php3?t=37823

 

[Guest]

umm... should this not be here?

 

[rafafredd]

This is SPAM! There is the same thread in the Drawing board.

Bad day for spaming around! First JZ threads, now this...

 

[EEMO1]

planning to make boards available?

 

[Vikki]

Handcrafted was sending a sample capsule to Marik for evaluation, did it ever arrive?
Vikki(uk) :?:

 

[Peter Simonsen]

:shock: I dont belive this !!! Getting "a bit" out of hand do we..???

Peter

 

[Hand Crafted Laboratories]

O-o-o..... :grin: :grin: :grin: calm down....

We simply was asking about EQ for new device.

-----------------------------------------------
WHY THAT, do and discuss here, at this forum as a whole, those have expressed here in negative sense-was correctly and when it is a question of our devices (good devices-was independently of that-loves someone it or not)-it to become bad. What it for discrimination???????!!!!! Your devices and decisions can be discussed here - ours it is impossible????? Here it is really dung. And it is easy to believe in it, having read through post especially nervous. :grin: :grin: :grin:

 

[Hand Crafted Laboratories]

[quote author="Vikki"]Handcrafted was sending a sample capsule to Marik for evaluation, did it ever arrive?
Vikki(uk) :?:[/quote]

No, sending was late because of experiments with electron beam gun a little, and also with drawing a covering by a new method-in the whole we have a little changed technology, and we wish to send to Marik capsule, made already on new technology. Still it is absolutely a little-we pending a source of gold for drawing.

 

[Hand Crafted Laboratories]

[quote author="kubi"]How are we supposed to know the best EQ for your strip if you don't share the rest of the unit (schematics, etc.)? Check nthe appropriate Metas, build some of the units and see what sound matches best the rest of your unit.

For the record: This is (mostly) a non-profit forum.[/quote]

The principle of construction Voice Processor is known for all - in this or that kind. Pre+Compressor (may be De-es) +EQ.In all, with the rest to us all is clear - except for EQ - what it should be, type, quantity of strips, Q.

Yes, really??? And we unless suggest to buy? We writing :
------------------------------------------------------------------
We are made this things -
http://papa-movie.com/html/micropnone.html
ready microphones and components
and others - full tube gears -
http://papa-movie.com/html/hand_crafted.html
Pre amp,Leveller,Line Mixer, Di-Box
-----------------------------------------------------------------
We show that we do - and TO BUY (the device or a component-for of components from us ask about the price) much or not - everyone can solve independently.

 

[Sammas]

:shock: :roll: :evil:

 

[Hand Crafted Laboratories]

HERE we do not advance our company - HERE we have taken an interest in opinion about EQ. For promotion we have enough means and the areas - here we are interested opinion, as engineers, by the way, also being DIY, as many other things here. Or it again the SPAM?

 

[Sammas]

Thats the thing...

You want opinions or ideas on a product you are planning on marketing.

This is a DIY forum... a place where people share there ideas so each member has an opportunity to build a unit. Not a place to come leech idea's for your own profit.

Unless you are offering full schematics, or boards for this vocal processor for the benefit of every forum member, such questions don't belong here.

Either, post a schematic of your current vocal chain for people to give there input and maybe even build themselves.

or

Pay Ethan the $1,000,000US engineering consultation fee for the collective input from the many knowledgable forum members...


:wink:

 

[rodabod]

[quote author="Hand Crafted Laboratories"] In all a question - what type of an equalizer is more preferable in opinion of the user? And whether the equalizer in general is necessary?
[/quote]

You need to understand (as people have already mentioned) what this forum is actually about.

If you want to learn from people, then discuss with them - then they can learn too!

You can't just ask people for information. Why would I want to tell you my favourite style of eq? I am probably not going to buy your product at the moment, so why would I care? It is all for your benefit.

So, what do you think about different types of eq? What can you tell me about advantages / disadvantages? Do you think they are necessary?

Good Luck,

Roddy

 

[Guest]

Hand Crafted,

#1 Don't make the same thread in more than one place. Seriously we'll all see it in one place just fine. You only end up looking like a spammer, even if that's not your intent.

#2 There are some people who sell stuff here, and that's fine with me. Everyone's gotta make thier bread somehow, and I gotta buy my stuff somewhere... BUT keep it in the appropriate forum, which is The Black Market. Remember, we build stuff here so a majority of us are more interested in parts, boards, and kits, rater than completed units.

#3 Be careful, if you spam here you will very quickly ruin your reputation.


I do have to say that I like the internal pics of your gear on your web page...

 

[alk509]

Let me add to what JCM said that asking for design advice for your product here is in bad taste. Do your own R&D.

Peace,
Al.

 

[Hand Crafted Laboratories]

Well, we have understood. But why, everybody to ask that here can is necessary - and we are not present? Because we the manufacturer? By the way, meanwhile without a loud name.

 

[rodabod]

I am glad you understand the points that have been made.

I would be sad to see you ruin your reputation. I am also interested in your products. They look great.

What are you trying to say here?:

"But why, everybody to ask that here can is necessary - and we are not present?"

"By the way, meanwhile without a loud name."

I am not sure I understand what you are saying. Do you use a "translator"? The last sentence looks like a phrase which has been badly translated.

Do you know anyone who can read your writing for you to help you translate? It would make it easier to read.

Good Luck,

Roddy

 

[EEMO1]

[quote author="Viitalahde"]He makes complete units and has them for sale on his website..

I don't like this ****. Stay on the Black Market![/quote]

yeah i know... just that usually when people ask questions like this, they make boards-schematics etc available for all.

i think this is not the best place to ask this. maybe post up the schematic to the drawing board and start the discussion there.

 

[Hand Crafted Laboratories]

[quote author="rodabod"]

"But why, everybody to ask that here can is necessary - and we are not present?"

"By the way, meanwhile without a loud name."

[/quote]

We was say -

"In fact everyone can ask, what will want? "

"We the small manufacturer, without world popularity (meanwhile) - we was DIY ` s. 3 years ago to us began to order devices big and costly studios all more often."

 

[soundguy]

hand crafted-

there has been discussion in the vein of what you are looking for on this group in the past, BUT, the discussion typically *did not* lead to a commercial manufactured project, it lead to a project that was build by board members and where possible (circuit boards or switches or transformers, etc) parts were offered to group members basically at cost.

If you are planning on designing a product which you either intend to give to group members for free or offer to group members for your production cost, Im would think more people would be interested in a discussion. The problem arises where you use a discussion about your product here and explicitly graft it onto a product for profit.

that seems to be a fairly clear line. Nobody is discriminating, actually just trying to maintain an accepted standard of use for this forum, non profit.

dave