iprovlek
Well-known member
They look great Ricardus...
Excellent job!!!
Excellent job!!!
Thanks!They look great Ricardus...
Excellent job!!!
This is where I get most of my hardware too, and I almost always get 100 of whatever I’m ordering. I try to use star bit for everything, hex when star isn’t available, and even started replacing all of the Phillips hardware that comes with the chassis. I now have a huge stock of black and stainless from 3-48 to 10-32 and M2-M5 in numerous lengths. I hate having to wait for a hardware order to finish a project.I am going to try some other set screws. I did a small order with my favorite hardware vendor, BOLT DEPOT, and we will see if better quality set screws will do the trick.
See if this supplier has any set-screws that meet your needs:These set screws are a tad longer that 1/8th inch. They measured at about .129 inches. My screw vendor here in the US sells 5/32 set screws which are a hair longer than these. They might work. But then that's cost I shouldn't have to absorb.
Enter your email address to join: