Dan's front panels and cases.. new panels for Gustav's projects, 1U CLX-VU panel

[Brotastic]

Dan,

  I was wondering if you had any ez1073 cases available?  I need two cases.  Let me know and I can send payment to your paypal.  Thanks.

Dan

 

[Mzaar]

Did anyone succeed in getting in touch with Dan lately ? 

I sent 3 mails.....no response....hope everything is fine for him.

 

[straypacket]

I ordered a face plate from him a few weeks ago and it arrived promptly...

 

[tIB]

I've had communication but no product as yet. Paid for GSSL faceplate on the 12th of April, last heard from on the 27th. Ill repost when it arrives, otherwise assume it hasnt...

EDIT: Arrived on the 18th May.

 

[exspence]

I e-mailed him a couple of days ago hoping to purchase a ez1073 case....no response yet.

 

[Winetree]

Got the cases
Thanks

 

[evilcat]

Hi Dan,

I will need 2 cases for ez1073, what XLR connectors and IEC socket do I need for your cases ?
Thanks,

Best,

Ben

 

[helterbelter]

....

 

[dgoszillai]

hi,

what is the hight needed fo ez1073 standoff ?
did 2 units time ago but don't remember this.

edit ---

I've used 5mm standoffs with the prototype case, these worked well.

oups sorry  ;D

 

[dribro]

Hi Dan

I need one 2254 panel and two 1176's  Is it available?
Regards
Adriano

 

[mhelin]

Sent email (a week ago)...

 

[ding]

Dan, any GSSL panels available or full case? Need 1 if you got it. 

Thanks

 

[Kaji]

Hi Dan,

Looking for a gssl front panel with super sidechain and turbo. Will PM you, thanks.

 

[ddt]

Hi All,

..still here, still working on panels and cases.. Thanks, one and all!

Kaji… got them in stock, emailed you back



A bit of news regarding the EZ1073 front panel design - I've got new front panels in stock, where I've enlarged the spacing a bit so that the Marconi reproduction knobs should now fit without covering the labels, always a good thing in my book.

The knobs are available here:
http://classicapi.com/catalog/index.php?cPath=23_184
and here:
http://www.don-audio.com/skirted-knob-black-knobs-Daka-Ware-knobs-pointer-knobs-eqp-1a-Knobs-EQP-1A-knoepfe-EQP1A-pultec-knoepfe-Parts-DIY-Kits-kit-pultec-knobsknobs-knoepfe-spare-knobs-collins

Thanks,
Dan

 

[Leer]

Wrote you a mail

Leer.

 

[veve]

Hi Dan,

I want to buy a GSSL case. Do you have one in stock?

Cheers...

 

[scott_humphrey]

Dan,

I received the two tube mic power supply cases. These are nicer than I expected them to be. Great work!

-Scott

 

[Phrazemaster]

Dan,

I received the two tube mic power supply cases. These are nicer than I expected them to be. Great work!

-Scott

I must agree with Scott; your cases are top-notch! I had a friend remark recently that my PSU for a DU67 looked like it came out of a factory!! Needless to say I was pleased!

 

[ddt]

Aww, thanks guys, but… it's probably not for me, there's another Dan doing these:
http://groupdiy.com/index.php?topic=41963.0

But I should probably start doing these too then.. Not that i see much point in duplicating efforts, but I guess that's the way it goes around here….

All the best,
Dan

 

[scott_humphrey]

Aww, thanks guys, but… it's probably not for me, there's another Dan doing these:
http://groupdiy.com/index.php?topic=41963.0

But I should probably start doing these too then.. Not that i see much point in duplicating efforts, but I guess that's the way it goes around here….

All the best,
Dan

Well, that's embarrassing....