tony666
Well-known member
I tried to mount a Haufe T14/1 transformer in my Apex 460 but it's not working. I soldered the green wires together like in Duka's Elam clone http://www.cankar.net/duka/Ela_M_Duka.GIF Then I replaced the standard transformer with the Haufe using the same routing and wires as in the original circuit. (apex shematic can be found here http://www.apexelectronics.com/index.php?tmp=13&id= )
One blue wire goes to ground, the other to C8 in Apex schematic. The red wires go to the output. After powering up nothing happens, even the tube isn't glowing. How can I troubleshoot this ?
One blue wire goes to ground, the other to C8 in Apex schematic. The red wires go to the output. After powering up nothing happens, even the tube isn't glowing. How can I troubleshoot this ?