Neumann U67 Clone : D-U67 Tube Microphone Build Thread.

[Khron]

edit: would this one fit? https://www.mouser.ch/ProductDetail/Switchcraft/QG7M?qs=sGAEpiMZZMvlX3nhDDO4AG9O2r1U3qeLy2Dp6uyqBPg=

If you really wanna pay that much just for that, sure, that'll fit, but...

But in case you'd like to pay 10 times less (and still be left over with a shell, that the 3-pin XLR insert your mic body may or may not have come with will fit)...

https://www.tme.eu/fi/en/details/fc6185/xlr-connectors/cliff/

Plus decent enough prices on other parts you might need(?)...

 

[happyforreal]

If you really wanna pay that much just for that, sure, that'll fit, but...

But in case you'd like to pay 10 times less (and still be left over with a shell, that the 3-pin XLR insert your mic body may or may not have come with will fit)...

https://www.tme.eu/fi/en/details/fc6185/xlr-connectors/cliff/

Plus decent enough prices on other parts you might need(?)...

thanks a lot for the suggestion. never heard of that page!

 

[eso]

thanks a lot for the suggestion. never heard of that page!

I've been using these with no issue:

https://www.aliexpress.us/item/3256...st_main.5.7b241802yKK3pY&gatewayAdapt=glo2usa

Spend more on the shipping than on the parts, but still cheaper than other options.

eso

 

[Khron]

thanks a lot for the suggestion. never heard of that page!

The UPS (express) Saver can even get a package at least to Finland the next business day after ordering (if one places the order by noon or so)

Spend more of the shipping than on the parts, but still cheaper than other options.

Delivery time of 2-4 weeks, or..?

 

[eso]

The UPS (express) Saver can even get a package at least to Finland the next business day after ordering (if one places the order by noon or so)



Delivery time of 2-4 weeks, or..?

The last ones I ordered were on 27/7/24 and they were delivered 2/8/24, ~ 1 week.

I just ordered a couple more so we'll see if they're still on top of it.

I am in southern California so it's mostly just a trip across the Pacific so that might help. Other destinations may be more challenging.

eso

 

[eso]

The last ones I ordered were on 27/7/24 and they were delivered 2/8/24, ~ 1 week.

I just ordered a couple more so we'll see if they're still on top of it.

I am in southern California so it's mostly just a trip across the Pacific so that might help. Other destinations may be more challenging.

eso

And I ordered a couple more on 1/12/24 and they just arrived 10/12/24

eso

 

[happyforreal]

do you guys know any alternatives to order the pad, lc and pattern switches. i ordered them from Dan but canada post is still on strike and it's literally the only thing missing from my build

EDIT: these perhaps?

https://www.mouser.ch/ProductDetail/Wurth-Elektronik/472121020421?qs=ufv2HEpFn%2BQSoNsZ3daIcw==
https://www.mouser.ch/ProductDetail/Wurth-Elektronik/472123020421?qs=ufv2HEpFn%2BSjVpf9eX53NQ==

 

[chrispbass]

Putting my xmas Mouser order in and see there are 400Meg resistors in the BOM. Not in stock...any alternative value ok?

 

[Khron]

Putting my xmas Mouser order in and see there are 400Meg resistors in the BOM. Not in stock...any alternative value ok?

470meg is fine. 390meg would be even closer, but a slightly more oddball value.

 

[chrispbass]

j

470meg is fine. 390meg would be even closer, but a slightly more oddball value.

Thanking you once again Khron. 470 is in stock

 

[happyforreal]

hey everyone, i am still on the lookout for the toggle switches.
i found this one?

https://www.digikey.ch/de/products/detail/c-k/ET01SD1AQE/3753242
do you know if that would fit/work?
or do you have any other alternatives?

thanks so much