First post here and first time modding a mic, though plenty of soldering experience.
I'd like to swap some caps in my Rode NTK to smooth out the top end a bit and plan to follow Gus' suggestions below:
http://web.archive.org/web/20100811083829/http://www.diyfactory.com/projects/gus/ntkmods.htm
I'd like to use Elna Silmic II caps (mainly for their smoothness and bass) for the 47uf/160V but the max they offer is 100V. Looking at the circuit on the link, would it be OK to use 2x(22uf/100V) caps to make 44uf/200V, or would it be better to use 22uf/100V + 33uf/100V to make 55uf/200V ? I'd prefer to use 2x 22uf as it would be easier to fit but would this have much effect on the mic?
I'd like to swap some caps in my Rode NTK to smooth out the top end a bit and plan to follow Gus' suggestions below:
http://web.archive.org/web/20100811083829/http://www.diyfactory.com/projects/gus/ntkmods.htm
I'd like to use Elna Silmic II caps (mainly for their smoothness and bass) for the 47uf/160V but the max they offer is 100V. Looking at the circuit on the link, would it be OK to use 2x(22uf/100V) caps to make 44uf/200V, or would it be better to use 22uf/100V + 33uf/100V to make 55uf/200V ? I'd prefer to use 2x 22uf as it would be easier to fit but would this have much effect on the mic?