Good stuff! Yeah I’ll get some dimensions for the faders in question in a week or two. I wish I knew how to actually do 3D CAD stuff…Give me the precise fader cap dimensions and I’ll do that, it’s quite easily done
For starters I wanted to do something true to the original. A rectangular piece of brass can be bent into a circular insert, drilled and tapped. Or maybe the original can be found ?
For my personal use I was thinking of having the screw hole drilled at 2.5mm and then tapped for m3 set screw + inside central hole at the correct size for the pot shaft. Milled in aluminium
---
Edit: here are some pictures taken from two different Reverb sales
Enter your email address to join: