C.B. - Boudio
Well-known member
That'll be in a couple of weeks, because of exams ;-)
Small valve mixing console
- Thread starter C.B. - Boudio
- Start date
Help Support GroupDIY Audio Forum:
C.B. - Boudio
Well-known member
So, the last revision of the first channel is almost done!
The rudimentary EQ under construction.
The Grand Scheme of Things. (nevermind the crappy paint job on the right, it's just some primer to protect the bracket from rusting).
Back part, with connections and the PF86 stage.
In the back, there's a small 220/12-0-12 transformer I use instead of a real Edcor one (which are being ordered), secondary terminated with a 27k resistor. There's also a switching jack: when a jack is inserted, the transformer secondary gets decoupled and a 10M grid resistor comes into circuit.
The switch right behind the pot, with the small print attached, is a +-20db pad.
Every signal wire is shielded.
I have to test it all yet, and I'm very curious as to how it'll work out!
The rudimentary EQ under construction.
The Grand Scheme of Things. (nevermind the crappy paint job on the right, it's just some primer to protect the bracket from rusting).
Back part, with connections and the PF86 stage.
In the back, there's a small 220/12-0-12 transformer I use instead of a real Edcor one (which are being ordered), secondary terminated with a 27k resistor. There's also a switching jack: when a jack is inserted, the transformer secondary gets decoupled and a 10M grid resistor comes into circuit.
The switch right behind the pot, with the small print attached, is a +-20db pad.
Every signal wire is shielded.
I have to test it all yet, and I'm very curious as to how it'll work out!
