Hi to all!
After making some 33609's and 2254/33609 hybrids,
I decided to make a simplified version....
2254C
This is 2254 soundpath with 33609's compressor's sidechain,
switchable high-pass filter added to sidechain, and
BA183 re-layed on motherboard.
5 units can be linked in surround btw...
No limiter sidechain... I used it some times on drums,
but mostly limiter was off when me or other tech's used
2254/33609 hybrids.
More important thing instead limiter (on my bad taste) is sidechain HPF.
I finnished to work on motherboard PCB and working now on
front-pannel PCB's and design.
All switches are Lorlin...just to save some bucks on Elma's.
-------------------------------------
Updated:
Here's front pannel design made by Purusha.
Support thread:
http://www.groupdiy.com/index.php?topic=32605.0
Cases:
http://www.groupdiy.com/index.php?topic=32647.0
-------------------------------------
Same as on 33609's, 3 types of trunny's can be used.
VU's.
For 1RU, we sticked with Sifam AL-19. It fits in 45mm height.
For 2RU (stereo version), I going to use ST7
from Farnell..
http://uk.farnell.com/7758200/electrical-circuit-protection/product.us0?sku=anders-electronics-st7&_requestid=232843
then make other backlighted scale (like in 33609) or....
http://www.groupdiy.com/index.php?topic=29123
(with linear option for GR metering).
Then....
Just to say, something to add? Change?
People?
-------------------------------------
Updated:
Now, there's nothing to add to design, it offered as kit, thanx to your feedback!
Here's the ordering thread:
http://www.groupdiy.com/index.php?topic=29771.0
-------------------------------------
:grin: :razz: :shock: :roll: :wink:
After making some 33609's and 2254/33609 hybrids,
I decided to make a simplified version....
2254C
This is 2254 soundpath with 33609's compressor's sidechain,
switchable high-pass filter added to sidechain, and
BA183 re-layed on motherboard.
5 units can be linked in surround btw...
No limiter sidechain... I used it some times on drums,
but mostly limiter was off when me or other tech's used
2254/33609 hybrids.
More important thing instead limiter (on my bad taste) is sidechain HPF.
I finnished to work on motherboard PCB and working now on
front-pannel PCB's and design.
All switches are Lorlin...just to save some bucks on Elma's.
-------------------------------------
Updated:
Here's front pannel design made by Purusha.
Support thread:
http://www.groupdiy.com/index.php?topic=32605.0
Cases:
http://www.groupdiy.com/index.php?topic=32647.0
-------------------------------------
Same as on 33609's, 3 types of trunny's can be used.
VU's.
For 1RU, we sticked with Sifam AL-19. It fits in 45mm height.
For 2RU (stereo version), I going to use ST7
from Farnell..
http://uk.farnell.com/7758200/electrical-circuit-protection/product.us0?sku=anders-electronics-st7&_requestid=232843
then make other backlighted scale (like in 33609) or....
http://www.groupdiy.com/index.php?topic=29123
(with linear option for GR metering).
Then....
Just to say, something to add? Change?
People?
-------------------------------------
Updated:
Now, there's nothing to add to design, it offered as kit, thanx to your feedback!
Here's the ordering thread:
http://www.groupdiy.com/index.php?topic=29771.0
-------------------------------------
:grin: :razz: :shock: :roll: :wink: