500 Series dimensions - PCB offset

[anythingcansoundgood]

Hello!
I've been searching for this answer for a long time but haven't found anything satisfactory.
I want to know the dimensions for the PCB 'offset' (and its corresponding EDAC placement) in relation to the side of the front panel.
Online, there are two screenshots of a CAD: one showing 11.1252mm, and another where I calculated 0.312 inches, which gives 7.9248mm.
Which one is correct? Thanks!

Here are the images :

 

[thelivingroom]

Hello!
I've been searching for this answer for a long time but haven't found anything satisfactory.
I want to know the dimensions for the PCB 'offset' (and its corresponding EDAC placement) in relation to the side of the front panel.
Online, there are two screenshots of a CAD: one showing 11.1252mm, and another where I calculated 0.312 inches, which gives 7.9248mm.
Which one is correct? Thanks!

Here are the images :
View attachment 140162
View attachment 140163

Both of those drawings are .438”/11.1252 mm from the center of the front panel to the center of the PCB, resulting in .312”/7.9248 mm from the left edge of the front panel (looking from the front) to the center of the PCB.

 

[anythingcansoundgood]

Both of those drawings are .438”/11.1252 mm from the center of the front panel to the center of the PCB, resulting in .312”/7.9248 mm from the left edge of the front panel (looking from the front) to the center of the PCB.

Oh ! How could I miss that... Thanks a lot !

 

[richiyobs]

In my last 500 project i placed the PCB center at 11.1mm respect to the mounting hole, the center of the panel.... It fits fine into the lunch-box.
If i'm not wrong the edac connectors into the motherboard are spaced 38.1mm